Manual

29
TROUBLESHOOTING GUIDE
Problem Solution
Cannot turn the transceiver
power ON.
• The battery pack may be dead. Recharge or replace
the battery pack.
• The battery pack may not be installed correctly.
Remove the battery pack and install it again.
Battery power dies shortly after
charging.
• The battery pack life is nished. The battery pack
may need replacing.
Cannot talk to or hear other
members in your group.
• Make sure you are using the same frequency and
QT/DQT or Common ID setting as the other group
members.
• Other group members may be using Privacy Talk.
Turn on your transceiver’s Privacy Talk.
• Other group members may be too far away. Make
sure you are within range of the other transceivers.
Other voices (besides group
members) are present on the
channel.
• Change the QT/DQT or Common ID settings. Make
sure all group members change the settings on their
transceivers to match the new QT/DQT or Common
ID setting.
The transceiver is malfunctioning
for no apparent reason.
• Reset the transceiver as described on {p.28}.
Cannot enter to setup mode. • These operations may not be available depending on
dealer settings. Consult your dealer.