Owner manual

TK-7150
40
Item Condition
Measurement Adjustment
Specifications/Remarks
Test-
equipment
Unit Terminal PartsUnit Method
ADJUSTMENT
8. TX high 1) CH-SIG : 3-1 Power meter Rear ANT TX-RX VR1 53W 53.0W± 0.5W
power Select _ _H Ammeter panel
Hi_Power_✽✽✽
in tuning mode
PTT : ON
Keep data at 256
2) CH-SIG : 2-1 Front Selector 50W 50.0W±1W
Select _ _L panel knob 11A or less
Hi_Powe_✽✽✽
in tuning mode
PTT : ON
3) CH-SIG : 1-1
Select _ _C
Hi_Powe_✽✽✽
in tuning mode
PTT : ON
4) CH-SIG : 3-1
Select _ _H
Hi_Powe_✽✽✽
in tuning mode
PTT : ON
9. TX low 1) CH-SIG : 2-1 15W 15W± 1W
power Select _ _L 11A or less
Lo_Power_✽✽✽
in tuning mode
PTT : ON
2) CH-SIG : 1-1
Select _ _C
Lo_Power_✽✽✽
in tuning mode
PTT : ON
3) CH-SIG : 3-1
Select _ _H
Lo_Power_✽✽✽
in tuning mode
PTT : ON
10. Maximum 1) CH-SIG : 2-1
Power meter Rear ANT Front Selector ±3.8kHz ±0.1kHz
deviation Select _ _L Deviation panel panel knob
• Wide Max_Dev_ _✽✽✽ meter
in tuning mode
PTT : ON AF VTVM Front MIC
Deviation meter filter AG panel
HPF : OFF Oscilloscope
LPF : 15kHz
De-emphasis : OFF
AG : 1kHz/50mV
2) CH-SIG : 1-1
Select _ _C
Max_Dev_ _✽✽✽
in tuning mode
PTT : ON
3) CH-SIG : 3-1
Select _ _H
Max_Dev_ _✽✽✽
in tuning mode
PTT : ON