Manual

10
BASIC OPERATIONS
SWITCHING POWER ON/ OFF
Press the switch to switch the transceiver ON.
•A beep sounds.
• If programmed, the TK-7160/ TK-8160 transceiver will momentarily display an
8-character power-on message.
• If the Transceiver Password function is programmed, “
” (TK-7160/ TK-8160)
or “
” (TK-7162/ TK-8162) will appear on the display when the power is turned ON.
Refer to “Transceiver Password”, below.
Press the switch again to switch the transceiver OFF.
■ Transceiver Password
To enter the password:
1 Press the and keys to select a digit.
2 Press the C> key to accept the entered digit and move to the next digit.
• Press the A key to delete an incorrect character (TK-7160/ TK-8160). Press
and hold the A key to delete all entered characters.
• Repeat steps 1 and 2 to enter the entire password.
3 Press the S key to confirm the password.
• If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
To enter the password using an optional DTMF keypad:
1 Press the DTMF keys corresponding to the password digits.
• Press the A or DTMF # key to delete an incorrect character (TK-7160/
TK-8160). Press and hold the A or DTMF # key to delete all entered
characters.
2 Press the S or DTMF key to confirm the password.
• If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
ADJUSTING THE VOLUME
Press the Volume Up key to increase the volume. Press the Volume Down key
to decrease the volume.
If Squelch Off has been programmed onto a key, you can use that function to
listen to background noise while adjusting the volume level.