Manual

ADD TO SCAN/ DELETE FROM SCAN

Depending on how your transceiver has been set up, a key may have been

programmed with the Scan Del/Add function. This function allows you to scan

only those channels which you desire.

To add or remove a channel to/from the Scan list, select the desired channel

then press the Scan Del/Add key.

To temporarily remove a channel from the Scan list, during Scan, press the Scan

Del/Add key while Scan is paused on the undesired channel. After switching the

Scan function OFF, or switching the transceiver OFF and then ON again, the

Scan settings return to normal.

• The (TK-7160/ TK-8160) or (TK-7162/ TK-8162) icon appears on the

display when the selected channel is added to the Scan list. The

(TK-7160/ TK-8160) or (TK-7162/ TK-8162) icon disappears when the selected

channel is removed from the Scan list.

On TK-7160/ TK-8160 transceivers, you can also add or remove a zone to/from

the Scan list. To add or remove a zone to/from the Scan list, select the desired

zone then press and hold the Scan Del/Add key for approximately 1 second.

To temporarily remove a zone from the Scan list, during Scan, press and hold the

Scan Del/Add key for approximately 1 second while Scan is paused on a

channel in the undesired zone. After switching the Scan function OFF, or

switching the transceiver OFF and then ON again, the Scan settings return to

normal.

• The icon appears on the display when the selected zone is added to the

Scan list. The

icon disappears when the selected zone is removed from

the Scan list.

REVERT CHANNEL

During Scan, pressing the PTT switch to transmit will cause the transceiver to

select the Revert channel. Your dealer programs the Revert channel for your

transceiver with one of the following six types:

• Selected: The last channel selected prior to Scan is the Revert channel.

• Selected + Talkback: While the transceiver is paused on a channel during Scan,

pressing the PTT switch will allow you to transmit (talk back) on the current channel.

Otherwise, the last channel selected prior to Scan is the Revert channel.

• Priority: If your dealer has programmed a Priority channel, this channel is the Revert

channel.

• Priority + Talkback: While the transceiver is paused on a channel during Scan,

pressing the PTT switch will allow you to transmit (talk back) on the current channel.

Otherwise, the Priority channel is the Revert channel.

• Last Called: The last channel on which a call was received is the Revert channel,

even if Scan has already resumed.

• Last Used: The last channel on which you transmitted is the Revert channel.