Manual

DIALING STORED DTMF NUMBERS

1 Press the microphone key.

•“” (TK-7160/ TK-8160) or “ ” (TK-7162/ TK-8162) appears on the display.

2 Enter the desired memory location number (1 ~ 9).

• The digits stored in the selected location number appear on the display.

•To cancel, press any key other than the PTT switch.

3 Press the PTT switch.

• If programmed by your dealer, no DTMF tone will sound when “D” is transmitted.

“D” can be used for a pause duration. The pause duration is programmed by your

dealer.

CLEARING STORED DTMF NUMBERS

1 Press the microphone # key.

•“” (TK-7160/ TK-8160) or “ ” (TK-7162/ TK-8162) appears on the display.

2 Press the microphone # key again.

•“ ” (TK-7160/ TK-8160) or “ ” (TK-7162/ TK-8162) appears on the display.

•To cancel, press any key other than 1 ~ 9.

3 Enter the memory location number (1 ~ 9) you want to clear.

• The memory location number is cleared and the display returns to normal.

REDIALING

1 Press the microphone key.

•“” (TK-7160/ TK-8160) or “ ” (TK-7162/ TK-8162) appears on the display.

2 Press the microphone 0 key.

• On TK-7160/ TK8160 transceivers, the digits last dialed appear on the display.

(Nothing is displayed on TK-7162/ TK-8162 transceivers.)

• If there is no data in the redial memory, an error tone will sound.

•To cancel, press any key other than the PTT switch.

3 Press the PTT switch.

Note: Switching the transceiver power OFF clears the redial memory.

STUN

This function is used when a transceiver is stolen or lost. When the transceiver

receives a call containing a stun code, either transmit mode will be disabled, or

both receive mode and transmit mode will be disabled. The stun code is

cancelled when the transceiver receives a call with a revive code.