Manual

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION

FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by

KENWOOD Corporation. FleetSync enables a variety of paging functions on

your transceiver, some of which depend on dealer programming.

The TK-7162/ TK-8162 only has access to the PTT ID function of the FleetSync

feature.

Note: Your transceiver functions include either FleetSync or 5-tone Signaling {page 22}, but not both.

SELCALL (SELECTIVE CALLING)

A Selcall is a voice call to a particular station or to a group of stations.

■ Transmitting (TK-7160/ TK-8160 Only)

1 Select your desired zone and channel.

2 Press the key programmed as Selcall or Selcall + Status to enter Selcall

mode.

3 Press the <B and C> keys to select the ID of the station you want to call,

or enter a station ID using a DTMF keypad.

• If Manual Input mode is enabled, you can enter digits by using a DTMF keypad.

To enter Manual Input mode, first press and hold the S or DTMF

key.

4 Press the microphone PTT switch and begin your conversation.

■ Receiving

The calling station’s ID will appear (TK-7160/ TK-8160) and an alert tone will

sound when a Selcall is received.

To respond to the call, press the PTT switch and speak into the microphone.

■ Identification Codes

An ID code is a combination of a 3-digit Fleet number and a 4-digit ID

number. Each transceiver must have its own Fleet and ID number.

• Enter a Fleet number (100 ~ 349) to make a group call.

• Enter an ID number (1000 ~ 4999) to make an individual call in your fleet.

• Enter a Fleet number to make a call to all units in the selected fleet (Interfleet call).

• Enter an ID number to make a call to the selected ID in all fleets (Supervisor call).

• Select “ALL” Fleet and “ALL” ID to make a call to all units (Broadcast call).

Note: The ID range may be limited by programming.