Operation Manual

XD-SERIES (En)

Basic section

1. Load a cassette tape.

(Recording is available on deck B only.)

2. Select the tape transport direction.

Let's record

Recording on TAPE

1 Open the door of deck B.

2 Insert a tape.

3 Close the door.

1 Select deck B by pressing the

A/B key.

2 Press the play key correspond-

ing to the desired direction.

3 Stop playback (by pressing the

& key).

To reverse the transport direction

÷ When recording is started, the

tape is transported in the direction

selected in this step.

÷ Wind the tape to the position

where recording is to be started.

Check the tape transport direction indicator. £

3. Set the recording condition.

1 Select the reverse mode. ª

2 Select the DOLBY NR mode. (XD-5...series only) ª

0

PUSH

OPEN

¡

÷ The Tape Equalizer cannot be used in recording. (XD-4...series only)

When equalizer or another effect is applied

to the sound, the sound with the applied

effect can be recorded. i

Note that this cassette deck cannot record onto

Metal tapes.

NoteNote

Note

REV. MODE DOLBY NR

÷ Differentiation between normal

(TYPE

) and high (TYPE ) tape is

set automatically.

÷ Remove tape slack before load-

ing.

R D