COMPACT HI-FI SYSTEM XD-SERIES XD-502/XD-552/XD-572S XD-402/XD-452 INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area.
Before applying power XD-SERIES (En) Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ............................................ AC 120 V only Austraria ............................................................. AC 240 V only Europe and U.K. ................................................. AC 230 V only China and Russia .............................................. AC 220 V only *Other countries ...........
Caution : Read the pages marked carefully to ensure safe operation. Before applying power 3 XD-SERIES (En) Contents Preparation section Application section Before applying power .............................. 2 Safety precautions...................................... 2 IMPORTANT SAFEGUARDS ........................ 4 Special features ............................................... 6 Handling of discs and tapes ............................ 7 System connection...........................................
IMPORTANT SAFEGUARDS 4 XD-SERIES (En) Caution :Read this page carefully to ensure safe operation. Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference. Preparation section 1.
IMPORTANT SAFEGUARDS 5 XD-SERIES (En) 13.Lightning – For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges. 18.
Special features XD-SERIES (En) Simplified operations using large-sized, Twin Jog Dials Multi-control jog dial (Right dial: For use in selecting a function) This dial allows you to set the CD program and timer-related operations while observing the operating conditions shown by the display and icons.
Handling of discs and tapes 7 XD-SERIES (En) Disc handling precautions Handling Hold the discs so that you do not touch the playing surface. Label side Playing side Do not attach paper or tape to either the playing side or the label side of the discs. Sticker Discs which can be played with this unit CD (12 cm, 8 cm), and the audio part of CDV, CD-G, CD-EG and CD-EXTRA. Use discs that comply with the IEC standard, for example a disc carrying the marking on the label surface.
System connection XD-SERIES (En) Accessories FM indoor antenna (1) AM loop antenna (1) Remote control unit (1) Speaker cords (2) AC plug adaptor (1) Preparation section Batteries (R6/AA) (2) Use to adapt the plug on the power cord to the shape of the wall outlet. (Accessory only for regions where use is necesary.) Provided in the speaker package Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
System connection 9 XD-SERIES (En) Speakers System Name Speaker (right) Speaker (left) − + XD-402 LS-N402 XD-452 LS-N452 XD-502 LS-N502 XD-572S/XD-552 LS-N552 Main Unit − + 1 ª · 3 4 3 4 Twist ª Speaker Unit Speaker cord 1 + 2 2 + Twist - R L FRONT SPEAKERS (6-16Ω) Caution regarding placement ÷ Never short-circuit the “+” and “-” speaker cords.
System connection XD-SERIES (En) Connection with other components (optional or commercially-available equipment) CAUTION Note on Connection Connect the components as shown in the diagram.Only plug the power cord into a power outlet once connections are completed. The rear panel configuration is variable depending on the models (countries or area).
System connection 11 XD-SERIES (En) FM outdoor antenna Surround (rear) speakers XD-5....series : Except for U.S.A. amd Canada XD-4....series : Except for U.S.A., Canada, U.K., Europe and Russia R Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the room and connect it to the FM 75Ω termimal. L −+ · Use a commercially-available antenna adapter (a small-sized model).
Controls and indicators XD-SERIES (En) Main Unit POWER (For U.S.A. amd Canada) 67 8 9 0 ! MINI HI-Fi COMPONENT SYSTEM XD-552 1 STANDBY BAND TIMER TUNING MODE ON/STANDBY 2 RDS Preparation section MIC MIC VOL. VOL 3 SO MIN. UND CONTROL BACK MU RDS LTI CONTROL MAX. PTY EON DOWN VOLUME CONTROL TA @ NEWS MIC INPUT MENU 3 4 5 & * TP UP DISPLAY /DEMO SELECT EX.BASS ENTER DOWN UP PHONES 0 0 PUSH OPEN PUSH OPEN # $ % ^ ) DOLBY NR XD-502/552/572S TAPE EQ.
Controls and indicators 13 XD-SERIES (En) Receiver 1 ON/STANDBY ( ) key * ON/STANDBY (POWER) key (For U.S.A. Canada) * Power ON/OFF switching is executed. 2 STANDBY indicator ( The indicator lights up when the power is set to the STANDBY mode. WT TIMER indicator The indicator lights up together with the STANDBY indicator when the power is set to the STANDBY mode after having activated a timer program. 3 PHONES terminal * For connection of a headphone (optional).
Controls and indicators XD-SERIES (En) Display The displays given in this manual are approximations only. They may differ from what actually appears on the display. XD-502 / XD-552/ XD-572S 1 2 3 4 5 Preparation section 6 7 •••••••••• 0 9 8 5 CD player-related indicators 1 Cassette deck-related indicators This section contains the cassette deck operation indicators. The indicated information includes the tape reverse mode and tape transport direction.
Controls and indicators 15 XD-SERIES (En) Remote control Unit The keys on the remote control unit with the same names as on the main unit have the same function as the keys on the main unit. 5 TIME key 1 2 3 2 3 SOUND CONTROL 4 5 6 EX.BASS 9 INPUT 8 DISC SKIP 5 TIME 2 9 0 ! 0 BAND +10 RANDOM REPEAT TEXT DISP.
Operation of remote control unit XD-SERIES (En) Loading batteries 1 Remove the cover. 2 Insert batteries. 3 Close the cover. 2 1 Preparation section ÷ Insert two R6 (“AA”-size) batteries following the polarity indications. Operation Plug the power cord into the mains power outlet and press the on/standby ( POWER) key of the remote control unit to turn power ON. After the power has been turned ON, press the desired key. To turn power off, press the on/standby( POWER) key again.
Operation of jog dials 17 XD-SERIES (En) This unit has two jog dials named the MULTI CONTROL and SOUND CONTROL jog dials. The MULTI CONTROL jog dial makes it possible to set (establish) many functions in a simple procedure. When the MENU key is pressed, the icon indicators light according to the MULTI CONTROL jog dial operation so you can select the desired mode based on a more intuitive method. CD PGM SO UND CONTROL BACK REC.
Let’s put out some sound XD-SERIES (En) Basic use method Listening through headphones PHONES Insert the headphone plug into the PHONES jack. ÷ The sounds from all speakers are cut off. 1 RDS 3 2 Basic section Reproducing sound with enhanced bass Muting the sound temporarily Reproducing sound with enhanced bass 1.
Let's put out some sound 19 XD-SERIES (En) Muting the sound temporarily (Remote control unit only) Blinks MUTE CD01 1:12 ÷ Press again to resume the original volume. ÷ The sound muting is also canceled when the volume is controlled. Reproducing sound with enhanced bass (EX. BASS) Lights XD-5....series EX.BASS EX.BASS XD-4....series One-touch operation function The power can also be turned ON by pressing the play key of the CD player, the play key of the cassette deck or the BAND key of the tuner.
Let's put out some sound XD-SERIES (En) If a disc has already been loaded in the CD player and the power is OFF, simply pressing the CD play key turns power automatically ON and starts playback. Playback of CD Skipping tracks Playback from desired track RDS TIME DISC SKIP To stop Playback 1 Start playback/ To pause playback 2 Basic section High-speed search in forward and reverse directions Playback from desired track 1. Load a disc. 0 OPEN 1 Open the tray. 2 Place a disc.
Let's put out some sound 21 XD-SERIES (En) Playback from desired track Skipping tracks U LT M Select the disc I CONTRO L To skip backward To skip forward (Main unit) DISC1 ÷ The tracks in the direction the dial is rotated are skipped, and the selected track will be played from the beginning. ÷ When the jog dial is rotated a little in the direction of counterclockwise once during playback, the track being played will be played from the beginning.
Let's put out some sound XD-SERIES (En) Playback of tape By loading a tape in the cassette deck to be used in playback beforehand, simply pressing the play key automatically turns the power ON and starts playback. To wind tape at high speed/To stop playback Start playback RDS 1 1 Basic section 3 Selection of reverse mode To stop playback 2 Selection of Tape Equalizer Selection of DOLBY NR ª 1. Load a cassette tape. 1 Open the door. 2 Insert a tape and close the 0 PUSH OPEN A A door.
Let's put out some sound 23 XD-SERIES (En) Selection of Tape Equalizer (Main unit only) To wind tape at high speed (XD-4....series only) To fast wind in direction | 1 To fast wind in direction \ @ & # Select Tape Equalizer only when playing back a tape recorded with Dolby Noise Reduction. (A tape recorded without Dolby NR cannot be reproduced in normal audio if Tape Equalizer is selected when playing it.) ¡ Lights up when Tape Equalizer is on. ÷ Press the & key to stop fast winding. TAPE EQ.
Let's put out some sound XD-SERIES (En) Relay play When tapes are set in the decks A and B and the reverse mode is set to “ ” (play of both sides), play of the second deck will be started automatically after play of the first deck has been completed. Tape play will be repeated alternately. A A ÷ Relay play is not possible in the reverse modes “ ” and “ ”. ÷ If a tape is loaded only in either deck, playback stops after having played both sides of the tape.
Let's put out some sound 25 XD-SERIES (En) Searching for the desired music program (DPSS)(XD-5....series only) The DPSS (Direct Program Search System) is capable of detecting non-recorded spaces of more than 4 seconds as “blanks between programs” and, based on this information, can return to the beginning of the music program being played or the beginning of a desired program by skipping up to 16 other programs. During play in direction 3 To play the next program : Press once.
Let's put out some sound XD-SERIES (En) Receiving broadcast station It is also possible to receive them by one-touch operations by storing up to 30 stations in the preset memory. When the BAND key is pressed, this unit will be switched on automatically. Collective presetting of stations 1 TUNING ¡ 1 RDS 2 3 4¢ Basic section One-by-one presetting 1. Select the broadcast band. BAND TUNING MODE 1 Each press changes the band.
Let's put out some sound 27 XD-SERIES (En) Collective presetting of stations (auto preset) Keep the TUNING MODE key depressed (about 2 seconds). One-by-one presetting (manual preset) 1 Press the ENTER key during reception. BAND TUNING MODE ENTER --FM 89.00 For U.K., Europe and Russia Auto Memo. Presetting is cancelled when no operation is executed for 5 seconds or more. 2 Select one of the preset numbers from 1 to 30. Other countries A.
Let's record XD-SERIES (En) Recording on TAPE Note Note that this cassette deck cannot record onto Metal tapes. When equalizer or another effect is applied to the sound, the sound with the applied effect can be recorded. i 4 RDS 1 3 5 Basic section 2 1. Load a cassette tape. (Recording is available on deck B only.) A 1 Open the door of deck B. 2 Insert a tape. 3 Close the door. 0 PUSH OPEN 1 ÷ Differentiation between normal (TYPE ) and high (TYPE ) tape is set automatically.
Let's record 29 XD-SERIES (En) To pause recording (Main unit only) Selection of DOLBY NR (Noise Reduction) (Main unit only) (XD-5....series only) Lights The DOLBY NR system minimizes the hiss noise heard when playing tape. When playing a tape prerecorded with DOLBY NR ON, be sure to set the DOLBY NR ON for playback. REC/ARM XD-5....series XD-4....series ÷ Pressing the key pauses recording after leaving a non-recorded space of about 4 seconds.
Let's record XD-SERIES (En) Points in CD recording When recording CD tracks onto a tape, if you leave the cassette deck in record-pause mode beforehand, the cassette deck recording can be started at the same time as the CD starts to be played. (Synchro recording function) 1 Put the CD player in pause mode. 2 Select the track to be recorded with the skip (4, ¢) keys. (The CD player pauses at the beginning of the selected track.) 3 Put the cassette deck in Record-pause mode.
Let's record 31 XD-SERIES (En) Copying tape (Tape dubbing) The contents of the tape in deck A can be copied onto the tape in deck B. 5 Use the same tape transport directions. Load tapes in the decks. Playing tape A A Recording tape ÷ When recording is started, the tape will be transported in the direction selected in this step. ( > :side A, < : side B) (1) Select the transport direction of deck A. U LT M 1 Select the “TAPE” input.
Playback of CD XD-SERIES (En) Listening in the desired sequence (program playback) Any titles on the discs in the tray can be listened to in the desired sequence. (Max. 32 titles) Select the “CD” input. Check that the CD player is in the 1 stop mode. If it is in play mode & ^ 2 Select “CD Program Play”. U LT M MENU I CONTRO L SELECT ÷ If the operation in step 2 is performed during playback of a track, the current track can be programmed as the first track in the program.
Playback of CD 33 XD-SERIES (En) 4 Check the programmed tracks (and replace, add or delete tracks as required). Press the TIME key on the remote control unit to switch the time display. To check: U LT M I CONTRO L P01 D1 T02 ÷ The programmed tracks are displayed in sequence. To replace a track in the program: U LT M I CONTRO L 1 Select the programmed disc or track to be replaced and press the SELECT key.
Playback of CD XD-SERIES (En) Repeated playback Desired titles or discs can be played back repeatedly. Select the “CD” input. To repeat only one track To repeat a disc 1 Cancel “PGM”. 1 Cancel “PGM”. Goes off If the “PGM” indicator is lit, make ‹ sure to turn it off. 2 Select the disc. If the “PGM” indicator is lit, make ‹ sure to turn it off. Goes off 2 Select the disc. DISC SKIP DISC SKIP 3 Select the track.
Playback of CD 35 XD-SERIES (En) To repeat all discs To repeat only the programmed tracks 1 Cancel “PGM”. Perform the procedure in 1 “Listening in the desired sequence If the “PGM” indicator is lit, make ‹ sure to turn it off. Goes off 2 Select the disc to be played first. (program playback)” till step 3 to program the desired CD tracks. ¤ Lights DISC SKIP ÷ All of the programmed tracks will be played repeatedly. 2 Start playback. 3 Select “All Repeat”.
Playback of CD XD-SERIES (En) Random playback As the titles each time are selected randomly, the music can be enjoyed without getting tired of it. Random playback can play tracks in one to three discs. Select the “CD” input. Goes off 1 Cancel “PGM”. If the “PGM” indicator is lit, make sure to ‹ turn it off. 2 Select the RANDOM mode. (For “One Disc Random” playback, select the disc in advance.) (Remote control unit only) RANDOM Press the key repeatedly to switch the display.
R.D.S. (Radio Data System) (For U.K., Europe and Russia) 37 XD-SERIES (En) RDS is a system which transmits useful information (digital data) for FM broadcasts together with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions such as automatic display of the station name.
R.D.S. XD-SERIES (En) Searching for a desired program type (PTY search) By specifying the type of program (genre) you want to listen to, the tuner automatically searches for a station which is currently broadcasting a program of the specified type. ¶ Set the reception band to FM. Preset RDS stations with the auto preset function. 1 Select the PTY search mode. NEWS102.50 (Remote control unit only) RDS TP PTY EON TA PTY NEWS 2 Select the desired program type.
R.D.S. 39 XD-SERIES (En) 3 Start the search. (Remote control unit only) PTY When searching for a Rock Music broadcast Display while the tuner is searching. Program type name display. ROCK1M2.50 Blinks RDS (Press the key again during search to cancel it.) ÷ No sound is heard while “PTY” is blinking. ÷ If a program of the desired type cannot be found, “NO PROG” is displayed, then after several seconds the display returns to the original display.
R.D.S. XD-SERIES (En) To be able to listen to the desired information at any time (EON) By using the EON function, which manages the information of other stations, listening to desired information like traffic information or news etc. can be reserved even when it is not being transmitted at the present.
R.D.S. 41 XD-SERIES (En) 4 Wait for the desired information. CD or tape playback may also be started. As long as the unit is ON, the unit is always ready for the reception. Waiting for information while a RDS station without EON function is tuned If the EON indicator does not light with the RDS station in steps 3 and 4, the tuner will wait for only the desired information broadcast from the tuned RDS station provided that the desired information has been selected in the previous step.
Convenient CD recording XD-SERIES (En) Selection of the Recording Type With this unit, the following edit recording is possible according to the purpose. Note Note that this cassette deck cannot record onto Metal tapes. If you want to select the track to be recorded while playing a CD e Recording only desired titles CD ONE TRACK RECORDING \ Perform this operation when a track you want to record starts during CD playback. This starts recording of the track from the beginning.
Convenient CD recording 43 XD-SERIES (En) Recording only desired titles (CD ONE TRACK RECORDING) When equalizer or another effect is applied to the sound, the sound with the applied i effect can be recorded. At the time of CD playback, any desired title can be selected immediately for recording. Recording preparations are required. • (Steps 1 to 3) 1 Playback of CD. ÷ Select a mode other than random play. ^ & 2 Select “Recording Options”.
Convenient CD recording XD-SERIES (En) Recording of an entire CD (CD DIRECT RECORDING) When equalizer or another effect is applied to the sound, the sound with the applied i effect can be recorded. Perform the following operation while the CD player is in stop mode to start recording at the same time as the start of playback. Recording preparations are required. • (Steps 1 to 4) Check that the CD player is in the 1 stop mode. If it is in play mode & ^ 2 Select “Recording Options”.
Convenient CD recording 45 XD-SERIES (En) Recording the programmed titles (CD PROGRAM RECORDING) When equalizer or another effect is applied to the sound, the sound with the applied i effect can be recorded. Program the desired tracks from up to 3 CD discs in the desired order and record the programmed playback onto tape. Recording preparations are required. • (Steps 1 to 4) Check that the CD player is in the 1 stop mode. If it is in play mode & ^ 2 Select “Recording Options” .
Effective Sound Adjustment XD-SERIES (En) This unit permits selection of the levels of the equalizer and sound field reproduction effects. Please select the equalizer as desired according to the music genre. Select the sound field mode according to the desired atmosphere. Balance adjustment Adjusts the balance of left and right volume. 1 Select “Audio Options”. U LT M MENU I CONTRO L SELECT The following items can be selected by turning the MULTI CONTROL jog dial.
Effective Sound Adjustment 47 XD-SERIES (En) Input level adjustment The input level from an external component connected to the MD/DVD INPUT jacks, such as a MD recorder, DVD player, VCR or analog turntable can be adjusted as desired. Adjust so that the volume of the MD/DVD input source sounds at an equivalent level to the CD . 1 Select the “MD/DVD” input. INPUT 2 Select “Audio Options”. U LT M MENU I CONTRO L SELECT The following items can be selected by turning the MULTI CONTROL jog dial.
Effective Sound Adjustment XD-SERIES (En) Listening to music with desired tone and sound field/ Switching the display (Equalizer effect and 3D surround effect) This unit permits selection of six preset equalizer patterns and three user’s equalizer patterns as well as the 3D surround levels. The “S.direct” (Source Direct) mode allows you to reproduce pure sound by bypassing the EX.BASS, equalizer and 3D surround circuitry.
Effective Sound Adjustment 49 XD-SERIES (En) Creation and memorizing of an equalizer pattern You can edit desired patterns manually and store them in memory. 1 Select “Audio Options”. U LT M MENU I CONTRO L SELECT The following items can be selected by turning the MULTI CONTROL jog dial. (“CD Program Play”) (“Recording Options”) (“Tape Dubbing”) “Audio Options” “Clock Options” +Scrolled display (Audio Options) Audio Select the number to be used for 2 storage.
Adjust the clock before setting the timer. Clock adjustment XD-SERIES (En) This unit incorporates a clock function. Be sure to adjust the correct time before using the timer function. The time is displayed only while the power is off. 1 Select “Clock Options”. U LT M MENU I CONTRO L SELECT The following items can be selected by turning the MULTI CONTROL jog dial.
Timer operation Adjust the clock before setting the timer. 51 XD-SERIES (En) Sleep timer (SLEEP) The power is turned OFF automatically after the specified period has elapsed. Operate easy To use Timer (O.T.T.) Playback of the selected input source starts at the specified time, and the power is switched off after one hour. This timer operates only once directly after setting. Timer programming Timer playback : Plays (or receives) the selected source in the set time range.
Adjust the clock before setting the timer. Timer operation 52 XD-SERIES (En) Operate easy To use Timer (O.T.T.) Timer playback can be set with a simple operation of just setting the time. With this function, the last source selected before turning power off can be played by the timer. The power turned ON by the timer is switched off automatically in an hour after the timer playback starts. p Adjust the clock before setting the timer. 1 Select the desired source and adjust the volume.
Adjust the clock before setting the timer. Timer operation 53 XD-SERIES (En) Timer programming The program timer can set timer playback and timer recording and both of these functions can be reserved concurrently. Either “Everyday” (executing a timer program once every day) or “One Time” (executing it only once) can be selected for each timer program. Once the time range and content of a timer program has been set, it can be activated or deactivated as desired.
Adjust the clock before setting the timer. Timer operation 54 XD-SERIES (En) 4 Select “Everyday” or “One Time”. U LT M I CONTRO L SELECT The reservation contents cannot be cleared. The contents are cleared only when they are changed. 5 Enter the ON time. U LT M The following items can be selected by turning the MULTI CONTROL jog dial.
Adjust the clock before setting the timer. Timer operation 55 XD-SERIES (En) 7 Make the desired reservation. For timer playback or AI timer playback 1 Select the input source. 1 Select the mode. U LT M Select “Play” or “AI Play”. I CONTRO L 1 “Play” ..... Timer play 2 “AI Play” .. Timer play with SELECT For timer recording U LT M I CONTRO L SELECT Select the recorded input source. 1 TUNER ...... Radio 2 MD/DVD ...
Important Items XD-SERIES (En) Maintenance Cleaning the head section Cleaning the heads and peripheral components For maintaining the best condition of the deck and for longer service life, always keep the heads (recording / playback / erase), capstan and pinch roller clean. Cotton swab Capstan To clean them, perform the following: 1. Open the cassette holder. 2. Using a cotton swab dipped in alcohol, clean the head (recording / playback / erase), capstan and pinch roller carefully.
In case of difficulty 57 XD-SERIES (En) What seems to be a malfunction is not always so. Before calling for service, check the following table according to the symptom of your trouble. Operation to reset The microcomputer may fall into malfunction (impossibility to operate, erroneous display, etc.) when the power cord is unplugged while power is ON or due to an external factor. In this case, execute the following procedure to reset the microcomputer and return it to normal condition.
In case of difficulty XD-SERIES (En) ÷ The frequency of the preset station is not tunable. ÷ The preset memory has been cleared because the power cord has been unplugged for a long period. ÷ Preset stations with tunable frequen¶ cies. ÷ Preset stations again. Demonstration starts suddenly. ÷ The power plug was unplugged from the outlet while the power switch was ON, or there was a power failure. ÷ This is not malfunction. Press the DISPLAY/DEMO key to cancel the 6 demontration.
In case of difficulty 59 XD-SERIES (En) ÷ The tape being played was recorded with distorted sound. ÷ A tape which has been recorded with the equalizer and/or 3D surround effects is being played back by applying the equalizer effect. ÷ Try another tape. Sound from the MD/DVD INPUT (external input) is distorted. ÷ The input level is too high. ÷ Decrease the input level. Noise is noticeable. ÷ The tape head is magnetized. Sound is distorted.
In case of difficulty XD-SERIES (En) Remote control unit Symptom Cause Remedy Remote control operation is not possible. ÷ Batteries are exhausted. ÷ The remote control is too far away from the system, the controlling angle is deviated or there is an obstacle in between. ÷ There is no tape or CD set in the component to be played. ÷ An attempt is made to play the cassette deck which is recording something. ÷ The MULTI CONTROL setting mode is activated. ^ ÷ Replace with new batteries.
Specifications 61 XD-SERIES (En) Main unit [ Amplifier section ] [ Cassette deck section ] (XD-5...Series) Rated power output (For U.S.A. and Canada) 80 watts per channel minimum RMS, both channels driven, at 6 Ω form 40 Hz to 15 kHz with no more than 0.9 % total harmonic distortion. (FTC) Effective output power during STEREO operation (Except for U.S.A. and Canada) 1 kHz, 10 % T.H.D., 6 Ω ............................... 100 W + 100 W Rated output power during STEREO operation (For U.K.
XD-SERIES (En) Knowledge section MEMO:
XD-SERIES (En) Knowledge section
This instruction manual is used to describe multiple models. Model availability and features (functions) may differ depending on the country and sales area. XD-402/XD-452 DIGITAL OUT jack (OPTICAL) SURROUND switch/ SPEAKERS terminals YES XD-502/XD-552 XD-572S YES 0 (Except for U.S.A. and Canada) ! (Except for U.S.A., Canada, U.K., Europe and Russia) YES (Except for U.S.A. and Canada) YES YES (Except for U.S.A. and Canada) YES DPSS ∞ Tape Equalizer YES YES YES YES £ YES DOLBY NR R.D.