COMPONENT SYSTEM/COMPACT HI-FI SYSTEM XD-980MD INSTRUCTION MANUAL KENWOOD CORPORATION COMPACT DIGITAL AUDIO B60-3000-00 SI AP (T) 98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 5 4 3 2 1 Downloaded from www.Manualslib.
Before applying power 2 power Caution : Read this page carefully to Before ensureapplying safe operation. XD-980MD (En) Units are designed for operation as follows. Europe and U.K. ........................................................................ AC 230 V only For the United Kingdom Factory fitted moulded mains plug 1. The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS 1362) fuse. Preparation section 2.
Caution : Read the pages marked carefully to ensure safe operation. Before applying power 3 XD-980MD (En) Contents Preparation section Convenient Recording Methods .............................. 42 Safety precautions ............................................................. Contents .............................................................................. Special features .................................................................. Handling of discs ......................................
Before applying power XD-980MD (En) Special features ) An MD recorder is standard equipment An MD recorder with high digital sound quality is standard equipment. Digital copying from a CD is also easy. This recorder has many functions like recording and display of names for discs and titles, changing the sequence of tracks, etc. ˇ SRS 3D stereo system This is an epochal system called Sound Retrieval System, which creates a three-dimensional sound space.
Before applying power 5 XD-980MD (En) Handling of discs Disc handling precautions Handling Cleaning Hold compact discs so that you do not touch the playing surface. If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. Label side Playing side Do not attach paper or tape to either the playing side or the label side of compact discs.
System connection 6 Before applying power XD-980MD (En) Connection of the System Accessories This is the method for connection between the main unit and the accessories. Please connect correctly as shown in the figure. AM loop antenna The supplied antenna is for indoor use. Place it as far as possible from the main system, TV set, speaker cords and power cord, and set it to a direction which provides the best reception.
Before System applying connection power 7 XD-980MD (En) Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer referring to “In case of difficulty”. h FM indoor antenna The accessory antenna is for temporary indoor use only. For stable signal reception we recommend using an outdoor antenna. Remove the indoor antenna if you connect one outdoors.
Before System applying connection power XD-980MD (En) Connection of Options (Optional Parts) In regard to the SURROUND switch This switch can be used only when the separately sold surround (rear) speakers are connected. When the switch is set to ON, surround playback can be enjoyed. When this switch is set to OFF, normal playback is executed. Connect separately sold parts as shown in the figure. Do not plug the power cord into the power outlet until all of the required connections have been made.
Before System applying connection power 9 XD-980MD (En) FM outdoor antenna Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the room and connect it to the FM 75Ω terminal. Please remove the indoor antenna after an outdoor antenna has been installed.
Controls and indicators Controls and indicators XD-980MD (En) Main unit 7 8 9 0 ! @ # MINI HiFi COMPONENT SYSTEM CLASSIC M/R POP E Q .O F F UP MULTI CONTROL /VOLUME DO W N Preparation section 1 ROCK ON/STANDBY $ RESET ∞ 2 3 EX.BASS SRS 3D MIC1 MIC2 DISP. ENTER MODE PHONES DEMO 4 5 6 HIT AUTO POWER SAVE MASTER MIN. MAX. TUNING BAND MIC MIX. AUTO INPUT - 4 + ENTER ( ) ¡ ™ £ ¢ º ∞ ARACTER CH TRACK EDIT ¢ BEST HITS O.T.E.
Controls and indicators 11 XD-980MD (En) Amplifier/Tuner section 1 ON/STANDBY ( ) key ^ h 2 RESET key This is used in case of erroneous operation of the microcomputer. Á 3 MIC MIX. knob Adjustment of the microphone volume at the time of microphone mixing. Á 4 MIC 1, MIC 2 jack For connection of a microphone (sold separately). ¨ 5 HIT MASTER key Used for karaoke etc. 6 AUTO POWER SAVE key & & : Used for EX. BASS playback ON/OFF. : Used for timer setting.
Controls and indicators XD-980MD (En) Display (amplifier and tuner section) Preparation section 3 1 2 EX.BASS PGM INTRO R D S EON N.B. EDIT TP TA MEMORY NEWS INFO. O.T.T. PROG. 1 2 PTY EQ. ON TUNED STEREO AUTO SLEEP * * * * * * * .* ;* * dB kHz MHz REPEAT RANDOM DISC ALL 1 4 CLASSIC ROCK EQ. POP MANUAL 2 5 VOL. 3 4 3 5 2 1 16 7 RUNNING INDICATOR 8 15 9 14 Basic section 2 Character information display section Input switching, frequency display, volume level, etc.
Controls and indicators 13 XD-980MD (En) Display (MD recorder section) 1 3 4 5 6 7 8 9 PGM REPEAT SINGLE TOTAL REMAIN TITLE SEARCH 0 DIGITAL MANUAL ! • ••••••••• @ # L R ∞ 30 10 5 3 1 0 (−dB) Preparation section 2 $ Basic section 8 SEARCH indication 9 DIGITAL indication 0 MANUAL indication ! Pause indication @ Playback indication # Character information, time display section $ Peak level indicator Application section 1 Recording indication 2 PGM (program) indication 3 REPEAT
Controls and indicators XD-980MD (En) Remote control Unit Model : RC-H9R Infrared ray system SET key ENTER key TITLE INPUT key TITLE SEARCH key ™ : This is used at the time of title search. 1 SRS 3D EX.BASS EQ. N.B. EDIT 1 2 3 4 5 6 Preparation section 7 MD AUTO/MANU. REC INPUT 3 TIME DISPLAY P. MODE REPEAT TRACK EDIT /CHARA. Q.MOVE +10 +100 SET ENTER BAND key (tuner) key P.CALL (fi, %)/skip (4, ¢) keys (tuner/CD) : These are used to receive memorized radio stations.
Operation of remote control unit Controls and indicators 15 XD-980MD (En) Loading batteries 1 Remove the cover. 2 Insert batteries. 3 Close the cover. 2 9( 1 (9 ÷ Insert two R6 (“AA”-size) batteries following the polarity indications. After plugging the power cord of this unit, press the ON/ STANDBY ( ) key of the remote control unit to turn the system ON. When the system is turned ON, press the key of the function to be operated.
Let's put out some sound Let's put out some sound XD-980MD (En) Basic use method Bass and treble compensation MINI HiFi COMPONENT SYSTEM RXD-980MD CLASSIC ROCK ON/STANDBY M/R POP 3 EQ.OFF UP DO W N 1 MULTI CONTROL /VOLUME RESET ∞ EX.BASS SRS 3D MIC1 MIC2 DISP. ENTER MODE PHONES DEMO HIT AUTO POWER SAVE MASTER MIN. MAX. Preparation section TUNING BAND MIC MIX. AUTO INPUT TITLE INPUT 0 DISPLAY MODE CHAR AC .
Let's put out some sound 17 XD-980MD (En) Muting the sound temporarily (Remote control unit only) Listening through headphones 1 Insert the headphone plug into the PHONES jack. EX.BASS PHONES CD MUTE )1 1 :5 ) 1 Blinks Remote control unit ÷ The sounds from all speakers are cut off. 2 Adjust the volume. ÷ Press again to resume the original volume. ÷ This is also cancelled when the volume is changed. UP DO W N MULTI CONTROL /VOLUME Bass compensation (N.B.
Let's put out some sound XD-980MD (En) Playback of CD When a disc is placed into the CD player in advance, the unit will be switched on automatically by pressing the playback (6) key, and playback will start. MINI HiFi COMPONENT SYSTEM RXD-980MD CLASSIC ROCK ON/STANDBY M/R POP EQ.OFF UP DO W N MULTI CONTROL /VOLUME RESET ∞ EX.BASS SRS 3D MIC1 MIC2 DISP. ENTER MODE PHONES DEMO HIT AUTO POWER MASTER SAVE MIN. MAX. TUNING BAND MIC MIX.
Let's put out some sound 19 XD-980MD (En) The key names in brackets in the explanations are the names of the keys on the remote control unit. Skipping tracks To fast forward and backward (Remote control unit only) 7 4 6 TUNING ¢ To skip backward ÷ The track in the direction of the button pressed is skipped, and the selected track will be played from the beginning. ÷ When the 4 key is pressed once during playback, the track being played will be played from the beginning.
Let's put out some sound XD-980MD (En) Playback of Mini Disc When a disc is placed into the MD recorder in advance, the unit will be switched on automatically by pressing the playback (3) key , and playback will start. Searching in a track MINI HiFi COMPONENT SYSTEM RXD-980MD CLASSIC ROCK ON/STANDBY M/R POP EQ.OFF UP DO W N MULTI CONTROL /VOLUME RESET ∞ EX.BASS SRS 3D MIC1 MIC2 DISP. ENTER MODE PHONES DEMO HIT AUTO POWER SAVE MASTER MIN. MAX. TUNING BAND MIC MIX.
Let's put out some sound 21 XD-980MD (En) Searching in a track Skipping tracks Forward search ¡ To skip backward - 4 3 + 8 ¢ 7 1 ARACTER CH To skip forward Backward search To pause playback 8 Ejecting the disc ÷ Each press pauses and plays the MD alternately. Preparation section ÷ Playback restarts when the key is released. (When the key is pressed in pause mode, unit returns to the pause mode at the reached position.
Let's put out some sound XD-980MD (En) Searching a desired track by its title (TITLE SEARCH) 1 Confirm that the “PGM” indicator is not lit. P. MODE ÷ When the titles of the tracks recorded on a minidisc for recording are entered in advance, search by title is possible for the tracks to be played. ÷ When the “PGM” display is lit, press the P.MODE key on the remote control unit to switch it off. Goes off PGM Press during stop.
Let's put out some sound 23 XD-980MD (En) In Regard to the TIME DISPLAY key This can be used to change the time display type at the MD recorder section. Elapsed time of track being played SINGLE 1:23 0 01 Remote control unit L R ∞ 30 10 5 3 1 0 (−dB) ∞ 30 10 5 3 1 0 (−dB) ∞ 30 10 5 3 1 0 (−dB) ∞ 30 10 5 3 1 0 (−dB) TIME DISPLAY Remaining time of track being played SINGLE -2:34 0 01 Each press switches the modes as follows.
Let's put out some sound XD-980MD (En) Receiving broadcast station It is also possible to receive them by one-touch operations by storing up to 40 stations in the preset memory. When the BAND key is pressed, the unit will automatically be switched on and reception status will be reached. Collective presetting of stations One-by-one presetting MINI HiFi COMPONENT SYSTEM RXD-980MD CLASSIC ROCK ON/STANDBY M/R POP EQ.OFF UP DO W N MULTI CONTROL /VOLUME RESET ∞ EX.BASS SRS 3D MIC1 MIC2 DISP.
Let's put out some sound 25 XD-980MD (En) Collective presetting of stations (auto preset) Keep the ENTER key depressed (about 2 seconds). The frequency changes automatically. Blinks ENTER EX.BASS MEMORY )1 FM TUNED STEREO AUTO 8 9 .) ) CLASSIC ROCK EQ. POP MANUAL VOL. MHz RUNNING One-by-one presetting (manual preset) 1 Press the ENTER key during reception. EX.BASS 2 Select one of the preset numbers from 1 to 40. UP “MEMORY” lights (for approx. 5 sec.) MEMORY )3 FM 8 9 .
Let's recording Let's put out some sound XD-980MD (En) This unit cannot record audio in monaural mode. Recording on MD MD recording is possible as “digital recording”, where the digital signal of the CD is used as it is, and as “analog recording”, where the analog signal of a broadcast etc. is converted to a digital signal. Note When equalizer or SRS 3D is applied to the sound, the sound will be recorded with applied effect in the case of analog recording.
Let's put out some sound Let's recording 27 XD-980MD (En) Pause the recording In regard to display messages Recording is not possible when one of the following messages is displayed. “DISC FULL” 8 “PROTECTED” “PLAY ONLY” : The minidisc is full. \ Erase unrequired tracks. : The write protect tab is open. \ Close it. : The minidisc is only for playback. \ Insert a recordable disc. P 5 f Preparation section ÷ Press the key again to resume recording.
Let's put out some sound Let's record XD-980MD (En) How to use the REC INPUT key Tips for recording from a CD When the input selection is CD and recording is started, digital recording is selected automatically and adjustment of the recording level is not required.
Playback of CD Playback of CD 29 XD-980MD (En) Listening in the desired sequence (program playback) Any titles on the discs in the tray can be listened to in the desired sequence. (Max. 32 titles) Select the “CD” input. EX.BASS If it is in play mode CD AUTO )1 @) :) ) CLASSIC ROCK EQ. POP MANUAL 1 2 VOL. 3 3 4 5 2 1 6 7 RUNNING INDICATOR 8 9 10 11 2 Light the “PGM” indicator. Lights EX.BASS PGM )1 ) :) ) CLASSIC ROCK EQ. POP MANUAL 1 2 VOL.
Playback of CD XD-980MD (En) Preparation section To stop playback AUTO To check the programmed tracks ”PGM“Blinks Program sequence Disc number of the track in the program sequence EX.BASS PGM P. CHECK CD )2 P-)2 CLASSIC ROCK EQ. POP MANUAL 1 2 VOL. 3 2 Basic section RUNNING ÷ Each time the key is pressed, the program No. (P-NO) and the track No. on CD are displayed. To add a track to the program 1 Select the disc. DISC SKIP Go to step 2 within 8 seconds.
Playback of CD 31 XD-980MD (En) Repeated playback You can repeatedly listen to a favorite track or disc. Select the “CD” input. To repeat a disc If the “PGM” indicator is lit, press the P.MODE key to turn it off. Confirm that this is not lit. EX.BASS PGM CD )1 CLASSIC ROCK EQ. POP MANUAL ) :) ) 1 2 VOL. 3 3 4 5 2 1 Each press switches the repeat mode. 1 REPEAT 2 DISC REPEAT 3 ALL REPEAT 4 Repeat OFF 6 7 RUNNING 2 Specify “DISC REPEAT”.
Playback of CD XD-980MD (En) Preparation section To repeat only one track 1 Confirm that the “PGM” indicator is not lit. If the “PGM” indicator is lit, press the P.MODE key to turn it off. Each press switches the repeat mode. 1 REPEAT 2 DISC REPEAT 3 ALL REPEAT 4 Repeat OFF )1 Lights REPEAT CLAS ROCK EQ MAN @) :) ) 1 2 3 2 1 2Select “REPEAT”. 3 Select the disc. To stop repeated playback 4 Select the track. Press the REPEAT key three times.
Playback of CD 33 XD-980MD (En) Listening to an unexpected title sequence (random playback) As the titles each time are selected randomly, the music can be enjoyed without getting tired of it. Select the “CD” input. If the “PGM” indicator is lit, press the P.MODE key to turn it off. Confirm that this is not lit. P. MODE EX.BASS PGM CD )1 CLASSIC ROCK EQ. POP MANUAL @) :) ) 1 2 3 3 5 6 7 Each press switches the modes as follows. 1 INTRO ......................
Playback of MD Playback of MD XD-980MD (En) Listening in the desired sequence (program playback) Use the following procedure to program desired tracks in a desired order. (up to 25 tracks) Preparation section Select the “MD” input. 1 Let the “PGM” indicator light. Lights P. MODE PGM - -- L R ∞ 30 10 5 3 1 0 (−dB) Press in stop mode. track numbers in the order you want to 2 Select play them. Selection of tracks Basic section 1 Select the track number to be played.
Playback of MD 35 XD-980MD (En) To add a track to the program 1 2 3 4 5 6 8 9 7 PTY SEARCH 0 +10 ÷ When a track No. is entered, the track will be added to the end of the existing program. +100 Press in stop mode. Preparation section 1 Sequentially select the track numbers to be added. 2 Confirm the selection. P. MODE Basic section Repeat 1 and 2 for selection of two or more tracks. Checking the order of tracks The “PGM” indicator blinks DIGITAL PGM MANUAL P.
Playback of MD XD-980MD (En) Repeated playback Select the “MD” input. Preparation section To repeat only the programmed tracks 1 Program the track sequence according to steps 1 to 2 of “Listening in the desired sequence”. › 2Let the “REPEAT” indicator light. REPEAT Basic section 3 Start playback. “REPEAT”, “PGM” light. PGM REPEAT 0 01 0:00 L R ∞ 30 10 5 3 1 0 (−dB) ÷ All of the programmed tracks will be repeated. ÷ In case only one track is programmed, only that track will be repeated.
R.D.S. (Radio Data System) R.D.S. 37 XD-980MD (En) RDS is a system which transmits useful information (digital data) for FM broadcasts together with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions such as automatic display of the station name. This unit is equipped with the following functions utilizing RDS data : The “RDS” indicator lights up when an RDS broadcast (signal) is received. EX.
R.D.S. XD-980MD (En) Searching for a desired program type (PTY search) By specifying the type of program (genre) you want to listen to, the tuner automatically searches for a station which is currently broadcasting a program of the specified type. ¢ Set the reception band to FM. Preset RDS stations with the auto preset function. 1 Select the PTY search mode. EX.BASS R D S EON PTY TP TA NEWS INFO. PTY CLASSIC ROCK EQ. POP MANUAL TUNED STEREO AUTO NEWs VOL.
R.D.S. 39 XD-980MD (En) 3 Start the search. When searching for a Rock Music broadcast Display while the tuner is searching. Blinks PTY SEARCH +10 EX.BASS R D S EON TP TA ROCK NEWS INFO. PTY TUNED STEREO AUTO M CLASSIC ROCK EQ. POP MANUAL VOL. MHz Program type name display. When a station is received. Goes off EX.BASS R D S EON TP BBC TA NEWS INFO. PTY 1 FM TUNED STEREO AUTO CLASSIC ROCK EQ. POP MANUAL VOL. MHz Station name display.
R.D.S. XD-980MD (En) To be able to listen to the desired information at any time By using the EON function, which manages the information of other stations, listening to desired information like traffic information or news etc. can be reserved even when it is not being transmitted at the present.
R.D.S. 41 XD-980MD (En) 4 Wait for the desired information. CD or MD playback may also be started. As long as the unit is ON, the unit is always ready for the reception. In case of waiting for information with an RDS station without EON function When there is no “EON” display with the operations of steps 3 and 4 and the desired information is selected in advance, waiting for the desired information will be done only with the presently received RDS station.
Convenient Recording Methods Convenient Recording Methods XD-980MD (En) Selection of the Recording Type This chapter explains also the cassette deck recording functions under consideration of combination with the cassette deck (option). Many convenient recording functions have been provided. Please select them according to the application. It is possible to record desired tracks in the desired sequence from two or more CDs. In this case, select “Program recording”.
Convenient Recording Methods 43 XD-980MD (En) What is CCRS? (only cassette deck (option)) Fade-in/fade-out This is a function for one-touch recording of a CD onto tape. When the CCRS key is pressed, the CD contents and the characteristics of the tape to be used are checked for about 60 sec. (depending on the CD contents), the recording level is set automatically, and recording starts. At the end of the recording, stop is executed automatically.
Convenient Recording Methods XD-980MD (En) One-touch recording of one CD, MD (one-touch edit recording of all tracks) All tracks of one CD or MD are recorded. Recording is possible to tape or MD from CD and to tape from MD. For recording to tape, please read “Let's record” in the operation manual of the cassette deck (option) carefully. When equalizer, SRS 3D, or any other effect is applied to the sound, the sound with applied effect can be recorded (except for digital recording from CD to MD).
Convenient Recording Methods 45 XD-980MD (En) When a desired track is found, only that track is recorded (One-touch edit recording of one track) While listening to a CD or MD, it is possible to record only the track being heard at that time from the beginning of that track. Recording is possible to tape or MD from CD and to tape from MD. For recording to tape, please read “Let's record” in the operation manual of the cassette deck (option) carefully.
Convenient Recording Methods XD-980MD (En) Producing a MD collecting only the first titles (BEST HITS Function) The first tracks of all set CDs will be recorded on MD in sequence. During recording of the third disc, the already recorded discs can be exchanged. This is convenient for collecting from a large number of single CDs. When equalizer, SRS 3D, or any other effect is applied to the sound, the sound with applied effect can be recorded (except for digital recording from CD to MD).
Convenient Recording Methods 47 XD-980MD (En) Producing a tape collecting only the first titles (BEST HITS Function) The first tracks of all set CDs will be recorded on tape in sequence. During recording of the third disc, the already recorded discs can be exchanged. This is convenient for collecting from a large number of single CDs. Please read “Let's record” in the operation manual of the cassette deck (option) carefully.
Convenient Recording Methods XD-980MD (En) Recording of one CD or several CDs (CD =MD) (Program recording) The desired tracks from 3 CDs can be recorded in the programmed sequence on one MD. When equalizer, SRS 3D, or any other effect is applied to the sound, the sound with applied effect can be recorded (except for digital recording from CD to MD). ´ˇ r Preparation section Recording preparation is required. 1 Check that the CD player is in the stop mode.
Convenient Recording Methods 49 XD-980MD (En) Recording of one CD or several CDs (CD =TAPE) (Program recording) The desired tracks from 3 CDs can be recorded in the programmed sequence on one tape. Please read “Let's record” in the operation manual of the cassette deck (option) carefully. When equalizer, SRS 3D, or any other effect is applied to the sound, the sound with applied effect can be recorded. ´ˇ r Recording preparation is required.
Convenient Recording Methods XD-980MD (En) Change of the track sequence according to the tape length (CD =TAPE only) (Time edit recording ) By specifying the recording time of the tape used, CD tracks can be recorded with their order automatically changed so that no tune is interrupted at the end of tape sides A and B. Please read “Let's record” in the operation manual of the cassette deck (option) carefully.
Convenient Recording Methods 51 XD-980MD (En) To check the edited contents (Program recording, Time edit recording) Disc number of the track in the program sequence EX.BASS PGM P. CHECK CD )2 P-)2 CLASSIC ROCK EQ. POP MANUAL 1 2 VOL. 3 2 Preparation section PGM flashing Program order ÷ Each time the key is pressed, the program No. (P-NO) and the track No. on CD are displayed. Basic section To clear the edited contents (Program recording, Time edit recording) P. MODE P.
Convenient Recording Methods XD-980MD (En) Fade-out/Fade-in at the tape reversal (CD =TAPE only) (Fade edit recording) The tune interrupted at the end of tape side A is faded out and side B starts with fading in from the middle of that tune. The tune interrupted at the end of tape side B is simply faded out. Please read “Let's record” in the operation manual of the cassette deck (option) carefully. When equalizer or SRS 3D is applied to the sound, the sound will be recorded with applied effect.
MD Edit Functions MD Edit Functions 53 XD-980MD (En) Selecting the editing function type When a commercially available Mini Disc fabricated for user recording is used, various editing operations can be applied after recording. Note that editing is not possible with commercially available prerecorded Mini Disc software designed for playback only. Function Limitations because of the MD Standard Some of the functions are limited because of the MD standard. Please check this before assuming a malfunction.
MD Edit Functions XD-980MD (En) Assigning a title to a disc or track When titles are assigned to a disc and its tracks, the titles cannot only be displayed during playback but title search (searching a track by the title) is also made possible. The assigned titles can be changed or deleted with the same procedure. Always remove the minidisc after title input or editing. The names in brackets in the explanations are the names of the remote control keys.
MD Edit Functions 55 XD-980MD (En) Changing or deleting a title Total number of title characters Up to 1792 characters can be input per disc and up to 80 characters can be input per track. A space (blank character) also require the same amount of data as alphanumeric characters. When deleting a title, it is not recommended to overwrite spaces on previous characters but use the DELETE function. Always remove the minidisc after title input or editing.
MD Edit Functions XD-980MD (En) Moving several tracks at a time (QUICK MOVE) Use the following procedure to change the current order of tracks by selecting a desired order and moving the tracks together. 20 continuous tracks within the specified range can be reordered at a time. The names in brackets in the explanations are the names of the remote control keys. Please execute operation in stopped condition. To abort operation, press the QUICK MOVE key again. 1 Press the QUICK MOVE key. Q .
MD Edit Functions 57 XD-980MD (En) Moving a single track (TRACK MOVE) This procedure shows you how to select and move (insert) a track to the track number you desire. The surrounding tracks are renumbered automatically. Repeating this procedure lets you arrange the tracks in the order you desire. Please execute operation in stopped condition. 1 Select “MOVE”. TRACK EDIT 2 Set it. Each press switches the operation.
MD Edit Functions XD-980MD (En) Dividing a track (TRACK DIVIDE) Preparation section Use the following procedure to divide a track into two by inserting a track number in its middle. For example, by inserting an additional track number before the passage you are specially fond of, it is easy to skip to there when you play the disc later. Note that the track numbers of the tracks located after the divided track are automatically incremented. 1 Play the track to be divided.
MD Edit Functions 59 XD-980MD (En) Combining two tracks (TRACK COMBINE) Use the following procedure to combine two tracks into one by deleting a track number. This operation allows to connect several tracks or a piece of music divided into several parts. After this operation, the track numbers of tracks located after the combined tracks are decreased automatically. The names in brackets in the explanations are the names of the remote control keys. 1Select “COMBINE”.
MD Edit Functions XD-980MD (En) Erasing a single track (TRACK ERASE) or erasing all tracks on a disc (ALL ERASE) Preparation section TRACK ERASE During playback, it is possible to erase only the track being played. The track numbers of the tracks after the erased track will be adjusted. Be careful in using this operation because a track cannot be recovered once it has been erased. ALL ERASE During stop, all tracks can be erased.
MD Edit Functions 61 XD-980MD (En) Image of erasing one track (TRACK ERASE) “WRITING” displayed during the mini disc ejection operation indicates that the data associated with recording or editing is being written on the disc. Do not apply vibration or shock to the unit while this message is displayed. Track to be erased 1 2 A 3 B 4 C 1 D 2 A 3 B Preparation section 4 After editing, eject and remove the mini disc. D Track Nos. are adjusted.
Effective Sound Field and Sound Quality Adjustment Effective Sound Field and Sound Quality Adjustment XD-980MD (En) This unit permits selection of equalizer and sound field playback. Please select the equalizer as desired according to the music genre. Select the sound field mode according to the desired atmosphere. Adjustment of balance and input level Preparation section Balance .......... Adjusts the balance of left and right volume. Input level .....
Effective Sound Field and Sound Quality Adjustment 63 XD-980MD (En) Listening with the desired sound (equalizer function) In addition to the three kinds of equalizer patterns which have been preset at the factory for use as reference, three equalizer patterns created manually by user can be stored in memory and recalled anytime. Selection of the equalizer pattern 1 Play the desired music. The display for the selected mode lights. Example for reference mode 2 Select equalizer mode.
Effective Sound Field and Sound Quality Adjustment XD-980MD (En) Preparation section Creation and memorizing of an equalizer pattern A desired equalizer pattern can be created and memorized. 1 Select the number to be recorded. MANUAL 2 MANUAL 3 CLASSIC ROCK M/R POP E Q .O F F MANUAL 1 2 Display “MANUAL” (Confirm.). Lights EQ. ON Basic section CLASSIC ROCK M/R POP MANUAL CLASSIC ROCK EQ. POP MANUAL 1 1 2 VOL. 3 3 E Q .O F F 4 5 2 1 Continue to step 3 within 3 seconds.
Effective Sound Field and Sound Quality Adjustment 65 XD-980MD (En) Enjoying Sound Field Effects Experiencing SRS 3D Stereo (Sound Retrieval System) 1 Switch on SRS 3D. Lights SRS 3D SRS 3D sRs 3D ON CLASSIC ROCK EQ. POP MANUAL 1 2 Preparation section The Sound Retrieval System is an epochal system which produces a three-dimensional sound space by applying the most suitable processing to the sound signal on the basis of the human listening mechanism.
Effective Sound Field and Sound Quality Adjustment XD-980MD (En) Enjoying Karaoke Preparation section When CDs or MDs with recorded voice and instrument music are played, it is possible to lower the volume only for the voice part. In combination with mic mixing, this permits easy enjoyment of Karaoke. 1 Connect a microphone. 1 Turn the MIC MIX. control fully counterclockwise. MIN. MAX. MIC MIX. 2 Plug the microphone into the MIC jack.
Effective Sound Field and Sound Quality Adjustment 67 XD-980MD (En) Enjoying Karaoke with software including the vocal part (HIT MASTER function) Each press switches ON and OFF alternately. 1 HIT MASTER ON 2 HIT MASTER OFF HIT MASTER Preparation section This function makes it possible to enjoy music sources including vocal as pseudo Karaoke sources. This makes it possible to enjoy Karaoke even without special Karaoke CDs etc. Lights EQ. ON HIT MAsTER CLASSIC ROCK EQ. POP MANUAL 1 2 VOL.
Adjust the clock before setting the timer. Timer operation Clock adjustment XD-980MD (En) When the AC cord is connected to a receptacle, the clock display starts to flash. Set the correct time following the instructions. Time display is made only when the unit is switched off. Preparation section Ensure that the unit is OFF. 1 Activate the clock adjustment mode. Example: Adjustment to 8:45 A M 1 2 :) ) AUTO 2 Enter the figure of hour.
Adjust the clock before setting the timer. Timer operation Timer operation 69 XD-980MD (En) Operate easy To use Timer (O.T.T.) Playback of the selected input source starts at the specified time, and the unit is switched off after one hour. This timer operates only once directly after setting. Sleep timer (SLEEP) The unit is turned OFF automatically after the specified period has elapsed. Timer playback, timer recording (PROG.1, PROG.
Adjust the clock before setting the timer. Timer operation 70 XD-980MD (En) Timer programming Two 24-hour timer systems (PROG.1, PROG.2) (which can be used every day) are available. In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be set and selected to be activated or not as required. For tape timer operation, please read the operation manual of the cassette deck (option) carefully. ÷ Timer reservation is possible for the two types PROG.1 and PROG.
Adjust the clock before setting the timer. Timer operation 71 XD-980MD (En) 5 Enter the ON time. 1 The time is returned. 2 ÷ After entering the figure of “hour” with the procedure in 1 and 2, enter the figure of “minute” using the same procedure. MULTI CONTROL /VOLUME DO W N UP The time is advanced. PROG. 1 ON ENTER AM 7 :) ) ÷ If you make a mistake, restart from step 4. 6 Enter the OFF time. 1 The time is returned.
Adjust the clock before setting the timer. Timer operation 72 XD-980MD (En) Ensure that the unit is OFF. Note The reservation contents cannot be cleared. The contents are cleared only when they are changed. Check the reservation content. Select the program number to be checked. EX.BASS Each press of the key switches the program numbers as follows. 1PROG.1........ Display of program 1 2PROG.2........ Display of program 2 3Normal mode ÷ The reserved contents will be displayed for 3 seconds per item.
Important Items In case of difficulty 73 XD-980MD (En) Maintenance Maintenance of the Set In regard to contact cleaners When the front panel, the case, etc. becomes dirty, wipe with a soft, dry cloth. Do not use thinner, alcohol, etc., as these can cause discoloration. Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component.
In case Important of difficulty Items XD-980MD (En) MD system The Mini Disc system has the features as summarized in the following. 1 2 3 4 5 Like CD (Compact Disc), playback can be started from any position. (Random access) It uses a disc with a diameter of 64 mm that is accommodated in a cartridge. Two types of discs can be used. Up to 74 minutes of recording or playback is possible using high-efficiency coding technology. Countermeasure against vibration is taken using semiconductor memory chip.
In case Important of difficulty Items 75 XD-980MD (En) Digital recording and SCMS The Mini Disc cannot record digital input signals from all sources. Note that digital recording is not possible with the following case. Copy using digital input In case the source contains the copy prohibit code (SCMS – Serial Copy Management System). — “SCMS” is displayed and the unit enters the record-pause mode. Copy using digital input Digital copy cannot be repeated.
In case of difficulty In case of difficulty XD-980MD (En) Operation to reset The microcomputer may fall into malfunction (impossibility to operate, erroneous display, etc.) when the power cord is unplugged while unit is ON or due to an external factor. In this case, execute the following procedure to reset the microcomputer and return it to normal condition. Use a pointed object to reset.
In case of difficulty 77 XD-980MD (En) Symptoms related to MD standard “DISC FULL” is displayed while the disc still has a remaining recordable time. ÷ More than 255 tracks (track No. 256 or more) cannot be recorded. (There may be also cases in which recording is impossible while the track number is less than 256.) In such a case, the REMAIN time display shows “0:00”. The possible recording time does not increase even when a short track is erased.
In case of difficulty XD-980MD (En) MD recorder section (Displayed messages and actions to be taken against them) Action Meaning NO DISC ÷ No disc is placed on the tray. ÷ Load a disc. 001 SCMS ÷ An attempt is made to record digital signal from a source while its digital copy has been prohibited by SCMS. ÷ Switch to analog recording. DISC FULL ÷ There is no recordable area on the disc. ÷ An attempt is made to record a 256th track. ÷ Use another recordable disc.
In case of difficulty 79 XD-980MD (En) CD player section Symptom A CD is placed in the player but it cannot be played. Cause ÷ The disc is placed upside down. ÷ The disc position is displaced. ÷ The disc is extremely dirty. ÷ The disc is scratched. ÷ Dew is condensed on the optics lens. Sound is not produced. ÷ The disc has not been placed. ÷ The player is not put to the play mode. ÷ The disc is extremely dirty. ÷ The disc is scratched. ÷ The disc is dirty. Sound skips.
Specifications In case of difficulty XD-980MD (En) Main unit (RXD-980MD) [Amplifier section] Rated power output STEREO MODE 50 watts per channel minimum RMS, both channels driven, at 6 Ω, 1 kHz with no more than 10 % total harmonic distortion. Preparation section (DIN) 1 kHz at 6 Ω, 0.7 % T.H.D. ....................................... 40 W + 40 W Signal to noise ratio AUX ........................................................................................