CD-RECEIVER XXV-01D INSTRUCTION MANUAL © B64-3151-00/00 (EW) B64-3151-00_E_English.Indd 1 05.4.
Contents Safety precautions 4 Notes 5 About CDs 7 About AAC, MP3 and WMA 8 Notes on Multi-function System 9 General features 10 Power Selecting the Source Volume Attenuator Audio Control Audio Setup Subwoofer Output Sound Field Control Sound Management system Equalizer Control WOW Control Bypass Control Memory mode Memory Recall mode Theft Deterrent Faceplate Faceplate Angle Adjustment Display Type Selection Graphic part/ Spectrum Analyzer Display Switching Wallpaper selecting Text Selection for
Menu system 42 Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Date Adjustment Date Mode Synchronize Clock DSI (Disabled System Indicator) Selectable Illumination Dimmer Contrast Adjustment Display-reversing Setting Built-in Amp Setting Dual Zone System Setting B.M.S. (Bass Management System) B.M.S.
Safety precautions 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. 2CAUTION To prevent damage to the machine, take the following precautions: • Make sure to ground the unit to a negative 12V DC power supply. • Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity.
Notes • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. • Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored. Reset button • The characters which can be displayed by ISO 8859-1.
Notes About "Media Manager" of PC application • "Media Manager" is recorded in the CD-ROM attached to this unit. • Refer to the attached installation manual for the installation method of "Media Manager". • Refer to the user’s manual recorded in the installation CD-ROM and Help of "Media Manager" for the operation method of "Media Manager". • The unit can play CD (hereafter called "ACDrive disc") created by "Media Manager". • Refer to the following site for the updated information of "Media Manager".
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it.
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is not comforming to the specification, may not play normally, or the file and folder names may not display correctly. • Attach the correct extension for the Audio file (AAC: ".M4A", MP3: ".MP3", WMA: ".WMA") • Do not attach the extensions to files other than the Audio file.
Notes on Multi-function System What is the Multi-function System? Multi-function System shows the Multi-function display, allowing you to select various functions and settings. Functions available for the current source are displayed. Operational 1 Press the [NEXT] button to Show the Multifunction display Each time you press the [NEXT] button, the Multi-function display is switched among the Source Function display, System Function display, and blank display.
General features NEXT ATT Release button VOL ANG TI S.F.C S.M.S EQ SRS WOW DSP Display SRC Control knob Tuner FM1-1ch 107.75MHz 01-Jan-05 Sat ATT indicator Power Turning ON the Power Press the [SRC] button. • When the power is ON, the (page 42) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the [SRC] button for at least 1 second. Press the [SRC] button. 10 | Volume Increasing Volume Turn the [VOL] knob clockwise.
Attenuator turns ON and OFF. When the Attenuator is ON, the "ATT" indicator blinks. Audio Control 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Audio item Turn the [VOL] knob.
General features Subwoofer Output Turning the Subwoofer output ON or OFF. Hold down on [AM] of the Control knob for at least 1 second. Each time you press the button, Subwoofer output switches ON and OFF. When it is ON, "SUBWOOFER ON" is displayed. • You can control this function when "2ZONE" of
DTA Front/DTA Rear DTA Subwoofer Position Setting 0 — 610 (cm) Front-Left/ Front-Right/ Front/ ALL • When the "2ZONE" of
General features Equalizer Control Top 40 Jazz "Top40" "Jazz" 1 Select the source to adjust Press the [SRC] button. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "EQ" appears. Refer to (page 9). 3 Enter Equalizer Control mode Turn the [VOL] knob to select "EQ". Press the [VOL] knob. • When "2ZONE" of
• To get the best sound, first set the Cabin Setting and Speaker Select Front/Rear parameters using the (page 13). 6 Exit Equalizer Control mode WOW Control Item Effect FOCUS TruBass Front TruBass Rear SRS 3D Range Middle/High/User/Through/Low OFF/1 — 9 OFF/1 — 4 OFF/1 — 4 OFF/1 — 4 Turn the [VOL] knob to select "Return". Press the [VOL] knob. • Effect: TruBass, FOCUS and SRS 3D are all set to values shown in the table below.
General features Bypass Control Temorarily bypassing DSP (Digital Signal Processor) System. 1 Select the source to adjust Press the [SRC] button. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "DSP" appears. Refer to (page 9). 3 Enter Bypass Control mode Turn the [VOL] knob to select "DSP". Press the [VOL] knob. 4 Put in the memory Turn the [VOL] knob to select "Memory1" or "Memory2". Press the [VOL] knob for at least 2 seconds.
"Recall1": Recall the value put in "Memory1" by (page 16). "Recall2": Recall the value put in "Memory2" by (page 16). 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. 7 Exit Memory Recall mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button.
General features Display Type Selection 5 Exit display control mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. Changing the display mode. 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Display" appears. Refer to (page 9). 2 Enter display control mode Turn the [VOL] knob to select "Display". Press the [VOL] knob. 3 Select the display mode Turn the [VOL] knob to select "Mode". Press the [VOL] knob.
6 Select the graphic/ spectrum analyzer display part display Push the Control knob towards [4] or [¢]. Each time you press the button, the graphic display/ spectrum analyzer display alternates between the displays shown in the table below. 3 Exit Display Control mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. … Graphic display/ Spectrum Analyzer display Movie 1 Movie 2 Movie 3 (Movie 1 and Movie 2) Spectrum analyzer 1 Select wallpaper manually 1 Turn the wallpaper scan OFF.
General features Display Type B In Audio file source Text Selection for Display Selecting the text display. 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Display" appears. Refer to (page 9). 2 Enter display control mode 3 Select the display mode Turn the [VOL] knob to select "Mode". Press the [VOL] knob. 4 Select the display Type Push the Control knob towards [4] or [¢]. Select the "Display Type B" display.
• Auxiliary input name is displayed for the Auxiliary input source. • * If the contents of the information cannot be displayed, Play time or Frequency is displayed. • *¹ If the contents of the information cannot be displayed, "No Name" is displayed. • *² If the contents of the information cannot be displayed, "No Text"/"None"/"Obscure Audio" is displayed. • When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed.
General features 3 3rd text display part 4 4th text display part 5 Indicator display part 6 Icon display part Display Type C/ Display Type D Text Display Switching Changing the text display. 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Display" appears. Refer to (page 9). 2 Enter display control mode Turn the [VOL] knob to select "Display". Press the [VOL] knob. 3 Select the display mode Turn the [VOL] knob to select "Mode".
Texts displayed on Display Type C/D display in 2-item displaya mode In Tuner source Information (12) Source name Frequency Information (34) Radio text (FM) Program Service name (FM) Spectrum Analyzer & Clock Date No display Display "Radio Text"* "Program Service Name"* "Speana/Clock" "Date" "Blank" In CD & External disc source Information (12) Source name Track number & Play time Information (34) Disc title Track title Disc name Spectrum Analyzer & Clock Date No display Display "Disc Title"* "Track Title
General features Texts displayed on Display Type C/D display in 4-item displayb mode In Tuner source Information Program Service name (FM) Radio text or Program Service name (FM) Radio text (FM) Program Service name (FM) Frequency Indicator Spectrum Analyzer & Clock Date No display Display "BAND+ch+PS"* "Radio Text"* Condition 1 1 "Radio Text"* "Program Service Name"* "BAND+ch+FREQ" "Indicator" "Speana/Clock" "Date" "Blank" 234 234 1 1234 1234 1234 234 In CD & External disc source Information Disc titl
Texts displayed on Display Type C/D in 1-item 4-rowc mode In Tuner source Information Radio text or Program Service name (FM) Display "Radio Text"* In CD & External disc source Information Disc title Track title Display "Disc Title"* "Track Title"* In Audio file source Information Song title & Artist name Album name & Artist name Folder name File name Display "Title/Artist"* "Album/Artist"* "Folder Name" "File Name" In DAB source Information Dynamic label Display "Dynamic Label"* • If whole informat
General features • During album art downloading, "Down-loading" is displayed. Downloading requires a maximum of 30 seconds. Display Type D Icon Display Switching Changing the Icon Display6. 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Display" appears. Refer to (page 9). Turn the [VOL] knob to select "Display". Press the [VOL] knob. 3 Select the display mode Turn the [VOL] knob to select "Mode". Press the [VOL] knob.
7 Exit display control mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. • When you selected the Display Type B display, select an easy viewable font color. • The "Indicator" item of Display type C/D can be set; however, the actual display color does not change. • This function can be set for each display type. External Display Switching TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "Call" is displayed. The audio system pauses.
Tuner features NEXT VOL AME SRC Band display 1 2 3 4 5 6 Control knob Frequency display Tuner FM1-1ch 107.75MHz Program Service Preset station number ST indicator Tuning Function of remote control Selecting the station. Direct Access Tuning 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands.
Station Preset Memory Preset Tuning Putting the station in the memory. Recalling the stations in the memory. 1 Select the band 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob towards [4] or [¢]. 3 Show the Multi-function display Press the [NEXT] button repeatedly until "1" — "6" appears. Refer to (page 9). 4 Select a preset number Push the Control knob towards [FM] or [AM].
RDS features NEXT VOL TI 1 2 3 4 5 6 SRC Control knob Tuner FM1-1ch 107.75MHz Program Service Radio Text Radio text Traffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio. Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF. When traffic information is ON, "Traffic INFO ON" is displayed.
PTY (Program Type) Selecting the Program Type and searching for a station. 1 Enter PTY mode Press the Control knob. "PTY Select" is displayed. • This function cannot be used during a traffic bulletin or AM reception. 2 Select the Program Type Push the Control knob towards [FM] or [AM]. Each time you push the knob, the Program Type alternates between the program types shown in the table below. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30.
RDS features Program Type preset Putting the Program Type in the Preset button memory and quick recall. Presetting the Program Type 1 Select the Program Type to preset Refer to (page 31). 2 Select a preset number Turn the [VOL] knob. 3 Preset the Program Type Press the [VOL] knob for at least 2 seconds. Recalling the preset Program Type 1 Enter PTY mode Refer to (page 31). 2 Select a preset number Turn the [VOL] knob.
CD/Audio file/External disc control features 0 VOL NEXT/MENU SRC Control knob IN indicator Folder number S.Mode Scan Random Repeat F.SEL Play mode indicator Compact Disc PLY F-02 T-01 10 : 00 Album/Artist Title Track number Playing CD & Audio file When there is no disc inserted 1 Open the panel. Press the [0] button. 2 Insert a disc. • When the faceplate slides open, it might interfere with the shift lever or other vehicle function.
CD/Audio file/External disc control features Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD Changer" "MD Changer" Disc player CD changer MD changer Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays.
Track/File/Disc/Folder Repeat Random Play Replaying the song, disc in the Disc changer or Audio file folder you are listening to. Play all the songs on the disc or Audio file folder in random order. 1 Show the Multi-function display 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Repeat" appears. Refer to (page 9). 2 Turn ON/OFF the Repeat Play Turn the [VOL] knob to select "Repeat". Press the [VOL] knob.
CD/Audio file/External disc control features Function of Audio file Disc Random Play Playing randomly from all of the Audio files recorded in the disc. Folder number display Displays the number in the folder belonging to the currently selected folder. Folder 2 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Random" appears. Refer to (page 9). 2 Turn ON the Disc Random Play Turn the [VOL] knob to select "Random".
Function of ACDrive disc Function of the ACDrive disc Switching the Play mode Letter Seek Arrange the playing orders of the songs by categories. You can search for the song, you want to play, by selecting the initial of Genre name, Artist name, or Album name. 1 Show the Multi-function display Press the [NEXT] button repeatedly until "S.Mode" appears. Refer to (page 9). 2 Select the Play mode Turn the [VOL] knob to select "S.Mode". Press the [VOL] knob.
CD/Audio file/External disc control features Disc Naming (DNPS) 9 Exit Menu mode Press the [MENU] button. Attaching a title to a CD. 1 Play the disc you want to attach a name to • A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Name set mode • When operation stops for 10 seconds the name at that time is registered, and Menu mode closes.
DAB tuner control features NEXT VOL TI SRC Control knob Frequency display ST indicator Band display 1 2 3 4 5 6 DAB DB1-1ch 220.094MHz Service Label Dynamic Label Preset station number About DAB Tuner control Service Preset Memory Refer to A* * group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function.
DAB tuner control features Recalling a Preset Service 1 Select the preset band Push the Control knob toward [FM]. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "1" — "6" appears. Refer to (page 9). 3 Select a preset number Turn the [VOL] knob. 4 Recall the service Press the [VOL] knob. Program Type (PTY) Function This function permits desired program types from within the received Ensemble to be searched and monitored.
Program Type preset Putting the Program Type in the Preset memory and quick recall. Presetting the Program Type 1 Select the Program Type to preset Refer to (page 40). 2 Select a preset number Turn the [VOL] knob. 3 Preset the Program Type Press the [VOL] knob for at least 2 seconds. Recalling the preset Program Type 1 Enter PTY mode Refer to (page 40). 2 Select a preset number Turn the [VOL] knob.
Menu system VOL MENU Menu System Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. SRC Control knob setting other items. 4 Exit Menu mode Press the [MENU] button.
• When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode After the input prohibition time lapses, "CODE" is displayed, and you can reenter the code. Number of times the incorrect code was input 1 2 3 4 Input prohibited time — 5 minutes 1 hour 24 hours Press the [MENU] button for at least 1 second.
Menu system In Standby mode In Standby mode Date Adjustment Synchronize Clock 1 Select Date Adjust mode Synchronizing the RDS station time data and this unit’s clock. Push the Control knob towards [4] or [¢]. Select the "Date Adjust" display. 2 Enter Date Adjust mode Display "SYNC: ON" "SYNC: OFF" Setting Synchronizes the time. Adjust the time manually. Press the Control knob for at least 1 second. The date display blinks.
In Standby mode Contrast Adjustment Adjusting the display contrast. Other than Standby mode/ When the Dual Zone System is ON Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System. … Display and Setting "Contrast: 1" "Contrast: 4" (Original setting) Display "Zone2: Rear" "Zone2: Front" Setting Sub source (Auxiliary input source) is to be rear channel. Sub source (Auxiliary input source) is to be front channel.
Menu system When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. 1 Select AMP Control mode Push the Control knob towards [4] or [¢]. Select the "AMP Control" display. first news bulletin is received. • The news bulletin volume is the same level that was set for (page 30).
• When no other stations with stronger reception are available for the same program in the RDS network, you may hear the incoming broadcast in bits and snatches. Turn OFF the AF function in such a case. Auxiliary Input Display Setting & Disc Naming Selecting the display when alternating to Auxiliary input source. For the Disc Naming refer to the (page 38).
Menu system Text Scroll In Standby mode Setting the displayed text scroll. CD Read Setting Display "Scroll: Manual" "Scroll: Auto" Setting Doesn’t scroll. Scrolls when the display changes. • The text scrolled is listed below. - CD text - Folder name/ File name/ Song title/ Artist name/ Album name - MD title - Radio text - Dynamic Lable for the DAB tuner source When there is a problem with playing a CD with special format, this setting plays the CD by force.
When the downloading finishes, "Finished Download" is displayed. • Picture downloading may take as long as 20 minutes. Quantity In CD mode ACDrive firmware version display Displaying the firmware version with the ACDrive function. Gradation Level 1 Select the firmware version display mode Push the Control knob towards [4] or [¢]. Select the "ACD F/W Version" display. 2 Display the ACDrive firmware version Cancelling Downloading Press the [MENU] button. Push the Control knob towards [FM] or [AM].
Menu system In DAB mode Menu Added for DAB When you connect the DAB tuner, the following menu is displayed: Display "Seek Mode:" "Priority DAB:" "DRC:" "Regional ASW:" "ASW Select" "PTY Watch" "Language Search" Feature Selecting DAB Seek Mode Automatic Switching DAB priority Dynamic Range Control (DRC) Regional Announcement Function Announcement select mode PTY Watch Select Mode Language Filter Search Mode • For details on menu items, refer to the instruction manual of the DAB tuner.
Basic Operations of remote control 43$ 70- 32# "55 !44 6/, "6% !5$ &D '. ". o D !-n :/.% $)2%#4 /+ !"# $%& '() *+, -./ 023 456 789 %*3&$5 1: 2 6/, Loading and Replacing the battery Use two "AA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. Basic operations [VOL] buttons Adjusts the volume.
Basic Operations of remote control Audio Control In Disc source [AUD] button Selects the Audio item to be adjusted. [4]/ [¢] buttons Going forwards and backwards between track/ files. [VOL] buttons Adjusts the Audio item. • Refer to
Accessories/ Installation Procedure Accessories 1 ..........1 2 ..........2 3 ..........1 4 ..........1 Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Connect the proper input and output wire to each unit. 3. Connect the wire on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5.
Connecting Wires to Terminals Subwoofer right output (Red) -1 7"" , To KENWOOD disc changer/ External optional accessory Subwoofer left output (White) Rear right output (Red) Rear left output (White) Front right output (Red) , , To connect these leads, refer to the relevant instruction manuals.
Functions 2WARNING Connecting the ISO Connector Yellow Blue/White Orange/White Red Black Battery Power Control Dimmer Ignition (ACC) Earth (Ground) Connection The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated.
Installation Installation Screwing the Faceplate on the Unit Metal mounting strap (commercially available) If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screws in the holes shown below. Firewall or metal support Bottom panel Accessory4 Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Removing the Unit 1 Refer to the section (page 57) and then remove the hard rubber frame. Remove the screw (M4 × 8) on the back panel. Insert the two removal tools deeply into the slots on each side, as shown.
Troubleshooting Guide What may seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. ? No sound can be heard, or the volume is low. ✔ The fader or balance settings are set all the way to one side. ☞ Center the fader and balance settings. ✔ The input/output wires or wiring harness are connected incorrectly. ☞ Reconnect the input/output wires or the wiring harness correctly.
Tuner source ? ? ? Radio reception is poor. ✔ The car antenna is not extended. ☞ Pull the antenna out all the way. ✔ The antenna control wire is not connected. ☞ Connect the wire correctly, referring to the section on . The desired frequency cannot be entered with the Direct Access Tuning. ✔ A station that cannot be received is being entered. ☞ Enter a station that can be received. ✔ You are trying to enter a frequency with a 0.01 MHz unit.
Troubleshooting Guide The messages shown below display your systems condition. Eject: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. Waiting: • Receiving radio text data. • Text for the DAB tuner source is being received. Load: Exchanging discs in the Disc changer. Reading: Reading the data on the disc. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD.
Specifications Specifications subject to change without notice. FM tuner section Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV/75 Ω Quieting Sensitivity (S/N = 46dB) : 1.6 μV/75 Ω Frequency response (±3.
B64-3151-00_E_English.Indd 62 05.4.
B64-3151-00_E_English.Indd 63 05.4.
B64-3151-00_E_English.Indd 64 05.4.
