User's Manual

You have to input the restriction code (of 4 digit) to use the operator determined barring function.

Note that the function requires support by SIM card.

3. Introduction

 Insert the SIM card and the battery

Ensure to turn off the equipment and disconnect with the charger before taking out the battery.

Ask your SIM card dealer whether he has provided SIM card service and the method of usage who

may be service provider or other dealers.

SIM card and its contacts are vulnerable to scratch or bending. Attention shall be attached when use,

insert or take out the card.

 Inserting/taking out T-FLASH CARD

Only use approved and compatible T-FLASH card applicable to the mobile phone. Approved

memory card trade standard is applied; however, certain bands may not be completely compatible

with the mobile phone. Using incompatible memory card may damage not only the card and the

mobile, but also the data stored in the card.

1. Turn off the mobile phone, remove the back cover and take out the battery.

2. Slide the clip of memory card to unlock.

3. Lift the clip, and insert the card into it with the side of golden contacts facing inwards.

4. Put down the clip and slide it to lock in position.

5. Put in the battery and install the back cover.

 Charging the battery

Check the model number of the charger before using it to charge the mobile.

Only use approved battery, charger and accessories applicable to the specific mobile model. Using

other types of battery, charger and accessories may violate the certification or warranty terms of the

equipment and may result in danger.

Refer to the dealer for supply of relative approved accessories. Hold the plug to plug out and cut off

the power supply of accessories instead of pulling the power cord.

1. Plug the charger in an AC power socket.

2. Insert the plug contact of the charger at the other end into the jack at the side of the mobile.

If the battery runs out of electricity, you may have to wait for a few minutes till the symbol of

charging is shown on the screen, and then you can make any call and answer any call.

The time of charging depends on the charger you used.

Note: Please do not at the same time insert the charger and USB data line, if inserted at the same

time may cause your computer and mobile phone damage (or lead to USB data cable can not be