www.CookWithKenyon.
Contents IMPORTANT SAFETY INSTRUCTIONS 3 Product Specifications Three Burner Models Two Burner Trimline Models One Burner Models 6 6 7 Cleaning and Care Cleaning the Cooktop Use Good Quality Cookware 9 9 Operation How the Elements Operate Indicator Lights Kenyon PUPS™ Turning On/Off Temperature Setting Guide 10 10 10 11 11 Installation Unpacking the Cooktop Check Electrical Supply Requirements Countertop Preparation Installing the Cooktop Electrical Connection Final Preparations Prior to Use 12 12
IMPORTANT SAFETY INSTRUCTIONS Read this section BEFORE operating the cooktop. The following information applies to all KENYON Electric Cooktops. THIS COOKTOP, LIKE ALL APPLIANCES, HAS THE POTENTIAL TO CREATE SAFETY PROBLEMS THROUGH CARELESS AND IMPROPER USE. PLEASE OBSERVE ALL OF THE FOLLOWING SAFETY PRECAUTIONS. Proper Installation. Be sure your appliance is properly installed and grounded by a qualified technician.
IMPORTANT SAFETY INSTRUCTIONS Do not cook on broken cooktop. If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact an authorized service center or KENYON Customer Care immediately at (860) 664-4906. Use proper pan size. This appliance is equipped with one or more surface units of different size. Select utensils having flat bottoms large enough to cover the surface unit heating element.
IMPORTANT SAFETY INSTRUCTIONS WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. The appliance is not intended to be operated by means of an external timer of separate remote-control system. Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the cooktop/ hob surface since they can get hot. CAUTION: The cooking process has to be supervised.
Product Specifications Three Burner Models - B40508 (120V) - B40608 (120V) - B40509 (240V) - B40609 (240V) BURNER DATA VOLTAGE 120V AC 240V AC DIAMETER Three 6.5” (165mm) Three 6.5” (165mm) OUTPUT IN WATTS 1200 each 1200 each PRODUCT DIMENSIONS WIDTH 21 3/4” 552.5mm DEPTH 20 1/4” 514.4mm HEIGHT 3 1/4” 82.6mm CUTOUT DIMENSIONS WIDTH 19 9/16” 496.9mm Two Burner Trimline Models - B40515PUPS (120V) - B40516PUPS (240V) DEPTH 18 1/16” 458.8mm RADIUS 1/4” 6.
Product Specifications One Burner Models - B40517PUPS (120V) - B40518PUPS (240V) BURNER DATA VOLTAGE 120V AC 240V AC DIAMETER One 6.5” (165mm) One 6.5” (165mm) OUTPUT IN WATTS 1200 1200 PRODUCT DIMENSIONS WIDTH 12 1/2” 317.5mm DEPTH 12” 304.8mm HEIGHT 3 1/4” 82.6mm CUTOUT DIMENSIONS WIDTH 11 1/2” 292.1mm 7 DEPTH 10 3/4” 273mm RADIUS 1/4” 6.
Product Specifications 21 3/4" 12" 20 1/4" 21" 3 1/4" 3 1/4” 20" 18 1/16" 19 9/16" 10 3/4" Two Burner Trimline Models Three Burner Models 12" 12 1/2" 3 1/4" 10 3/4" 11 1/2" One Burner Models 8
Cleaning and Care Cleaning the Cooktop Should something melt onto the surface, immediately move it to a cool area of the cooktop with a razor blade scraper and then remove it from the cooktop as soon as possible. The cooking surface and control areas of your ceramic glass cooktop are identified by permanent patterns in the cooktop. The appliance is easy to maintain and clean. Keep the cooktop in top performance by following these simple guidelines for use and cleaning.
Operation READ SAFETY INSTRUCTIONS BEFORE OPERATING YOUR APPLIANCE Kenyon PUPS™ IMPORTANT! Only model numbers that end with PUPS will include this feature. Do not store items on the appliance when not in use. Items could melt or catch fire from residual heat or if the appliance is turned on inadvertently. Kenyon PUPS™ (Pop Up Potholder System) keep pots safe and secure using a very innovative, patented design. How the Elements Operate This KENYON cooktop contains ribbon-type radiant heating elements.
Operation Turning On/Off Temperature Setting Guide Turning a Burner On Push the knob down and rotate either clockwise (highest) or counter-clockwise (lowest). When the control is in any position other than Off, it may be rotated without pushing it down.
Installation IMPORTANT! IMPORTANT! Save this document for future reference. This appliance must be properly installed and grounded by a qualified technician. Do not remove the clear plastic covering film on the ceramic glass until cooktop is ready to be used. Check the Electrical Supply Requirements Unpacking the Cooktop This product must be installed in accordance with national, state and local electric codes.
Installation ELECTRICAL SUPPLY REQUIREMENTS The supply must be from an individual grounded circuit that is protected by a circuit breaker and rated per the specifications for the various models as shown in the table below.
Installation Countertop Preparation Please read this section prior to making cutout for cooktop. It is important to plan ahead for installation of the cooktop, keeping the following dimensions in mind. A - 13 inches maximum depth of overhead cabinets B - 36 inches is minimum height of countertop above floor C - The minimum flat countertop surface that the cooktop will rest upon must be equal to or greater than the overall cooktop dimensions (refer to page 7 for the overall cooktop dimensions).
Installation Countertop Preparation Continued... GLASS PANEL PUTTY STRIP Before making the countertop cutout, check for clearance. Check to see if the cooktop will clear the front and side walls of the base cabinet. It is also important to provide enough ventilation. COUNTERTOP Use a soft bedding compound that will prevent damage if later removal for service is necessary. We recommend a nonadhesive type of sealant, such as plumber’s putty, maximum compressed thickness of 1/16”.
Installation Electrical Connection Final Preparations Prior to Use Before proceeding further, verify that the power supply is disconnected. Verify that the appropriate electrical supply requirements have been met. Please refer to the table on page 12 for appropriate electrical requirements. The cooktop is supplied with a 36-inch long conduit for a connection to an accessible junction box. The 240V conduit consists of three insulated wires.
Statement of Warranty KENYON Kenyon International, Inc (the “Company”) warrants its products in normal usage to be free of defects in materials and workmanship subject to the conditions and limitations below. Any part, which proves to be defective in normal usage during the warranty period will be repaired or replaced by the Company. In order for product to be covered under this warranty it must be returned to the Company for evaluation. Please contact kenyonservice@cookwithkenyon.
