KENYON ® INSTRUCTION MANUAL Mediterranean 2-Burner Caribbean 2-Burner Mediterranean, Caribbean & Alpine Ceramic Glass Cook Tops (120Volt Models) KENYON P.O. Box 925 8 Heritage Park Road Clinton CT 06413 USA Phone: (860) 664 - 4906 FAX: (860) 664 - 4907 Part # 143117 Rev 3/23/2004 mrpserver\kenyonengineering\manuals\ulmanuals
LEASE READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE INSTALLATION AND USE OF APPLIANCE *** THIS MANUAL AVE FOR FUTURE REFERENCE
Mediterranean Series Cook Top PRODUCT SPECIFICATIONS Two Burner B41510 - 120V AC - one 6” (165mm) burner @ 1200 watts one 8” (200mm) burner @ 1400 watts Overall dimensions: Cutout dimensions: 23-1/4” x 14-1/4” x 2-5/8” 590.6mm x 362.0mm x 66.7mm 21-3/4” x 12-3/4” with 1/4” radius 552.5mm x 323.9mm with 6.4 radius Trimline B41515 - 120V AC - two 6” (165mm) burners @ 1200 watts each Overall dimensions: Cutout dimensions: 21” x 12” x 2-5/8” 533.4mm x 304.8mm x 63.
Caribbean Series Cook Top PRODUCT SPECIFICATIONS Two Burner B41601 - 120V AC - two 6” (165mm) burners @ 1200 watts each Overall dimensions: Cutout dimensions: 21” x 12” x 2-5/8” 533.4mm x 304.8mm x 63.5mm 20” x 10-3/4” with 1/4” radius 508mm x 273mm with 6.4 radius Single Burner B41605 - 120V AC - one 6” (165mm) burner @ 1200 watts Overall dimensions: Cutout dimensions: 12” x 12-1/2” x 2-5/8” 304.8mm x 317.5mm x 63.5mm 10-3/4” x 11-1/2” with 1/4” radius 273.0mm x 292.1mm with 6.
Alpine Series Cook Top PRODUCT SPECIFICATIONS Two Burner - Large B49510 - 120V AC - one 6” (165mm) burner @ 1200 watts one 8” (200mm) burner @ 1400 watts Overall dimensions: Cutout dimensions: 23-1/4” x 14-1/4” x 2-5/8” 590.6mm x 362.0mm x 66.7mm 21-3/4” x 12-3/4” with 1/4” radius 552.5mm x 323.9mm with 6.4 radius Two Burner - Small B49515 - 120V AC - two 6” (165mm) burners @ 1200 watts each Overall dimensions: Cutout dimensions: 21” x 12” x 2-5/8” 533.4mm x 304.8mm x 63.
INSTALLATION INSTRUCTIONS FOR KENYON CERAMIC GLASS COOK TOPS Important: Save this documentation for review by local inspector. ! Important: This appliance must be properly installed and grounded by a qualified technician. STEP #1 Unpacking the Cook Top Carefully unpack the cook top from its shipping container. If possible, retain the original shipping carton and protective packaging in the event the unit ever has to be returned for service. Verify and identify the package contents.
For future reference, please record the serial number of your cook top here: STEP #2 Check the Electrical Supply Requirements This product must be installed in accordance with national, state and local electric codes. The following table provides the correct voltage, amperage and frequency that must be supplied to the cook top.
STEP #3 Countertop Preparation Please read this section prior to making cutout for cook top. It is important to plan ahead for installation of the cook top, keeping the following dimensions in mind (please refer to Figure A).
Allow a 2” minimum clearance between the bottom of the metal pan of the cook top and any combustible surface located below, ie: the upper edge of a drawer installed below the cook top (see Fig. B on previous page). Failure to provide proper clearances and ventilation may result in a fire hazard.
STEP #4 Installing the Cook Top There are two mounting brackets supplied with the glass ceramic cook top. These brackets are designed to hold the cook top firmly in place. The cook top does not have a metal frame and should be bedded to the countertop using a soft bedding compound that will prevent damage if later removal for service is necessary. We recommend a very small bead of silicone sealant.
STEP #5 Electrical Connection Before proceeding further, verify that the power supply is disconnected. Verify that the appropriate electrical supply requirements have been met. Please refer to the table on page 2 for appropriate electrical requirements. The cook top is supplied with a 48-inch long conduit for a connection to an accessible junction box. The conduit consists of three insulated wires.
USER’S GUIDE & CARE Read this section BEFORE operating the cook top. The following information applies to all KENYON Electric Cook Tops. This cook top, like all appliances, has the potential to create safety problems through careless and improper use. Please observe all of the following safety precautions. • Proper Installation Be sure your appliance is properly installed and grounded by a qualified technician. • Never use your appliance for warming or heating the room. • Do not leave children alone.
• Do not use water on grease fires. Smother fire or flame or use dry chemical or foam-type extinguisher. • Use only dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholder touch the heating elements on the appliance. Do not use a towel or other bulky cloth in place of a potholder. • Do not cook on broken cook top. If cook top should break, cleaning solutions and spillovers may penetrate the broken cook top and create a risk of electric shock.
OPERATION READ SAFETY INSTRUCTIONS BEFORE OPERATING YOUR APPLIANCE The cooking surface areas of your glass ceramic cook top are identified by permanent patterns in the cook top. The appliance is easy to maintain and easy to clean. Keeping the cook top in top performance can be achieved by following the simple guidelines for use and cleaning below: Cookware Chances are that your existing cookware will work just fine with your glass ceramic cook top.
Knobs & Indicator Lights (continued) There are a series of lights that provide indications of burner operation and hot surfaces. These lights are located adjacent to the control knobs. When the control is in the “on” position, a red light is lit indicating which burner is on. For your safety, we have incorporated a “HOT” indicator light. When lit, this light indicates that some part of the glass ceramic cook top is too warm to touch or place articles upon.
WARRANTY KENYON International (the “Company”) warrants its products in normal usage to be free of defects in materials and workmanship subject to the conditions and limitations below. Any part which proves to be defective in normal usage during the warranty period will be repaired or replaced by the Company. This warranty is subject to the following conditions and limitations: 1.