INSTALLATION GUIDE & OPERATION MANUAL Lite-Touch™ Portrait 1 , 2 and 3 Burner Ceramic Glass Cooktop KENYON INTERNATIONAL P.O. Box 925 8 Heritage Park Road Manual Part # 143409 Clinton, CT 06413 USA Phone: (860) 664 - 4906 FAX: (860) 664 - 4907 Website: www.cookwithkenyon.com //DC-1/engineering/manuals/B40575_B40576_143409D.
PLEASE READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE INSTALLATION ANY US OF APPLIANCE. DO NOT DISCARD THIS MANUAL. SAVE FOR FUTURE REFERENCE.
Contents Product Specifications Page 1 INSTALLATION Package Contents 2 Electrical Requirements 3 Countertop Preparation 4 Installing Cooktop 5 GETTING THE MOST OUT OF YOUR COOKTOP Cookware 8 Cleaning 8 TOUCH CONTROL COOKING Control Graphics 10 Energizing Cooking Zone 11 Heat Settings 11 COOKTOP FEATURES Heat Boost 12 Residual Heat Indicator 12 Automatic Sh
™ KENYON LITE TOUCH 1 and 2 BURNER TOUCH CONTROL PORTRAIT ® SPECIFICATIONS Three Burner Models: B40547 240V AC Two 6” (165mm) burner @ 1200 watts One 8” (200mm) burner @1800watts (landscape) Overall dimensions: 30” x 14-1/4” x 3-1/4” 762mm x 362mm x 83mm Cutout dimensions: 29-1/8” x13-3/8” with 1/4” radius 740mm x 340mm with 6mm radius Two Burner Models: B40575 120V AC B40575L 120V AC Two 6” (165mm) burner @ 1200 watts (portrait) Two 6” (165mm) burne
™ KENYON LITE TOUCH 1 and 2 BURNER TOUCH CONTROL PORTRAIT ® SPECIFICATIONS ! IMPORTANT! Save this document for future reference. This appliance must be properly installed and grounded by a qualified technician. STEP #1 Unpacking the Cooktop Carefully unpack the cooktop from its shipping container. If possible, retain the original packaging should the unit ever need to be returned for service. Verify and identify the package contents. The following items should be included in the carton.
STEP #2 Check the Electrical Supply Requirements This product must be installed in accordance with national, state and local electric codes. The following table provides the correct voltage, amperage and frequency that must be supplied to the cooktop. The supply must be from an individual grounded circuit that is protected by a circuit breaker and rated per the specifications for the various models as shown in the table below.
WARNING To eliminate the risk of burns by reaching over heated surface units, cabinet storage space located above surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets. ! Before making the countertop cutout, check for clearance. Check to see if the cooktop will clear the front and side walls of the base cabinet.
Note: When making cut-out of countertop, radius the corner of the cutout (1/4” radius is typical), to help prevent cracking of the countertop. Follow the countertop manufacturer’s instructions regarding the minimum corner radius and reinforcement. STEP #4 Installing the Cooktop The cooktop is supplied with two metal mounting brackets. These brackets are designed to hold the cooktop firmly in place. The cooktop does not have a metal frame and should be sealed to the countertop.
! Warning- Grounding The entire appliance must be grounded at all times when the electrical power supply is on. Do not ground the appliance with the neutral house supply wire (white). A separate ground must be used. STEP #5 Electrical Connection Before proceeding further, verify that the power supply is disconnected. Verify that the appropriate electrical supply requirements have been met. Please refer to the table on page 3 for appropriate electrical requirements.
™ KENYON LITE TOUCH 1 and 2 BURNER TOUCH CONTROL PORTRAIT ® USE AND CARE IMPORTANT SAFEGUARDS, SAVE THESE INSTRUCTIONS! 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against electrical shock do not immerse cord, plugs, or GFCI module in water or other liquid. 4. Close supervision is necessary when any appliances is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts. 6.
™ KENYON LITE TOUCH 1 and 2 BURNER TOUCH CONTROL PORTRAIT ® USE AND CARE SAFETY Read this section BEFORE operating the cooktop The following information applies to all KENYON Electric Cooktops. This cooktop, like all appliances, has the potential to create safety problems through careless and improper use. Please observe all of the following safety precautions. Proper Installation Be sure your appliance is properly installed and grounded by a qualified technician.
™ KENYON LITE TOUCH 1 and 2 BURNER TOUCH CONTROL PORTRAIT ® OPERATION GUIDE READ SAFETY INSTRUCTIONS BE FORE OPERATING YOUR APPLIANCE The cooking surface and control areas of your glass ceramic cooktop are identified by permanent patterns in the cooktop. The appliance is easy to maintain and clean.
™ KENYON LITE TOUCH 1 and 2 BURNER TOUCH CONTROL PORTRAIT ® OPERATION GUIDE Do not use water on grease fires. Smother fire or flame or use dry chemical or foam-type extinguisher. Use only dry pot holders. Moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holder touch the heating elements on the appliance. Do not use a towel or other bulky cloth in place of a pot holder. Do not cook on broken cooktop.
™ KENYON LITE TOUCH 1 and 2 BURNER TOUCH CONTROL PORTRAIT ® OPERATION GUIDE POWER ON INDICATOR This display indicates whether the selected element is ON or OFF. POWER LEVEL DISPLAY POWER LEVEL DISPLAY MASTER POWER SENSOR Digital display indicates heat output of the selected element. The indicator lamps follow the sweep of the screened graphic. There are eight possible heat levels.
™ KENYON LITE TOUCH 1 and 2 BURNER TOUCH CONTROL PORTRAIT ® OPERATION GUIDE CALIBRATION ON/OFF Upon application of electrical power to the cooktop, the controller will run a self-calibration process. The controller will then sound an audible confirmation tone and the display will briefly illuminate. The cooktop is now ready to be used. ENERGIZING THE ELEMENTS ON/OFF POWER ON INDICATOR To turn the selected element ON, touch and hold the Master Power Sensor for two seconds.
™ KENYON LITE TOUCH 1 and 2 BURNER TOUCH CONTROL PORTRAIT ® OPERATION GUIDE HEAT BOOST When an element is energized and a heat setting is selected, the Heat Boost feature is activated and the element will stay at full power for the time duration in minutes indicated in the chart below. HEAT LEVEL 0 1 2 3 4 5 7 8 HOT SURFACE INDICATOR LAMP HOT SURFACE INDICATORS Your KENYON cooktop features a Hot Surface indicator.
Warranty Kenyon International, Inc (the “Company”) warrants its products in normal usage to be free of defects in materials and workmanship subject to the conditions and limitation below. Any part, which proves to be defective in normal usage during the warranty period will be repaired or replaced by the Company. This warranty covers only ceramic glass cooktops and is subject to the following conditions and limitations: 1.
