Owner's Manual

STEP #6

Final Preparations Prior to Use

Remove the plastic lm from the cooktop. Clean

the cooktop before you use it for the rst time. A

thorough cleaning with a recommended cooktop

cleaner (Cerama Bryte Ceramic Cooktop

Cleaner) will provide a clean, shiny coating on

the cooktop surface.

The next section of the manual covers cooktop

use, maintenance and service information.

Please keep these instructions with the

KENYON cooktop for future reference.

Name Plate

Label Location

Warning - Grounding

The entire appliance must be grounded at all times when the

electrical power supply is on. Do not ground the appliance with the

neutral house supply wire (white). A separate ground must be used.

STEP #5

Electrical Connection

Before proceeding further, verify that the power supply is disconnected. Verify that the

appropriate electrical supply requirements have been met. Please refer to the table on page 10

for appropriate electrical requirements. The cooktop is supplied with a 36-inch long conduit for a

connection to an accessible junction box. The 240V and 208V conduit consists of three insulated

wires. There are two insulated hot lead conductors (red and black) and one insulated ground

conductor (green). The 120V conduit consists of three insulated wires. There is the hot lead

conductor (black), the nuetral conductor (white) and one insulated ground conductor (green).

Attach conductor wires to residence wiring in accordance with national, state and local

electric codes.