Use and Care Manual

16
Installation
Unpacking the Grill
1
Carefully unpack the grill from its
shipping container.
Verify and identify the package contents.
The following items should be included in the
carton. If any components are missing or
damaged, call KENYON immediately.
2
This product must be installed in accordance
with national, state and local electric codes.
The following table provides the correct voltage,
amperage and frequency that must be supplied
to the grill.
Check the Electrical Supply
Requirements
KENYON
PART NUMBER
MAX CONNECTED
LOAD
POWER SUPPLY
INPUT
PLUG
TYPE
B70425 3000 Watts 240V AC 13A 50/60Hz 3 wire cord no plug
ELECTRICAL SUPPLY REQUIREMENTS
The supply must be from an individual grounded circuit that is protected by a circuit breaker and
rated per the specications for the model as shown in this table.
PARTS INCLUDED
Texan Grill with
IntelliKEN Touch™
(1) Stainless
steel cleaner
3 feet of drain hose
with brass fitting
(9) Mounting
screws
IMPORTANT!
If the electrical supply does not meet
the product specifications, consult
with a licensed electrician before
proceeding with installation!