User Manual

ERROR CODE DESCRIPTION ACTION TO REMEDY ERROR
E04
Unit operating at high
temperature.
Allow unit to cool. Ensure
correct cooking utensil type is
used. Lower the cooking level or
temperature setting.
E06
E07
E08
E09
Internal electronic control issue. Refer to Kenyon Customer
Care.
E10
More than two control functions
activated at the same time for
three seconds, unit de-powered.
Re-power unit and command
one control input at a time.
TROUBLESHOOTING INDEX
The Kenyon Texan Grill with IntelliKEN Touch™ is a sealed unit that does not require regular
maintenance. Please follow our operating instructions as mentioned above. If your grill requires
service, this must be preformed by Authorized Personnel only.
Please call Kenyon Customer Care at 860-664-4906.
TEXAN GRILL WITH INTELLIKEN TOUCH™ MAINTENANCE
De-power and re-start the unit to clear the
display. Allow the unit to cool as necessary.
Lock out the main power supply to the unit by
closing the breaker before performing any
wiring operations. If the problem persists,
please call Kenyon Customer Care at
860-664-4906, M-F, 8AM – 5PM EST or email
at [e-mail].
Error Code Readout
In the event that the Texan Grill with IntelliKEN
Touch™ is not operating correctly, the
control readout will display an error code that
will identify the problem. If an error code is
shown on the display, identify the code in the
Troubleshooting Index below and take action
as noted.
13
Operation