www.CookWithKenyon.
Contents IMPORTANT SAFETY INSTRUCTIONS 3 Product Specifications Four Burner Model Two Burner Large Models Two Burner Small Models One Burner Large Models One Burner Small Models 6 6 7 7 8 Cleaning and Care Cleaning the Cooktop Use Good Quality Cookware 9 9 Parts and Features of Your Cooktop 10 Operation How Induction Cooking Works Indicator Lights Safety Lock Feature Turning On Cooking Mode Options Heat Level Cooking Mode Temperature Cooking Mode Changing Temperature Units Automatic Power Sharing Ti
IMPORTANT SAFETY INSTRUCTIONS Read this section BEFORE operating and installing the cooktop. The following information applies to all KENYON Electric Cooktops. THIS COOKTOP, LIKE ALL APPLIANCES, HAS THE POTENTIAL TO CREATE SAFETY PROBLEMS THROUGH CARELESS AND IMPROPER USE. PLEASE OBSERVE ALL OF THE FOLLOWING SAFETY PRECAUTIONS. Proper Installation. Be sure your appliance is properly installed and grounded by a qualified technician.
IMPORTANT SAFETY INSTRUCTIONS Do not cook on broken cooktop. If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact an authorized service center or KENYON Customer Care immediately at (860) 664-4906. Use proper pan size. This appliance is equipped with one or more surface units of different size. Select utensils having flat bottoms large enough to cover the surface unit heating element.
CONSIGNES DE SÉCURITÉ Veuillez lire la totalité de ces instructions avant d’installer ou d’utiliser cet appareil. Les informations suivantes s’appliquent à toutes les tables de cuisson électriques KENYON. Installation adéquate. Assurez-vous que votre appareil soit correctement installé et mis à la terre par un technicien qualifié. N’utilisez jamais cet appareil pour le chauffage domestique. ATTENTION Ne pas laisser sans surveillance en présence d’enfants.
Product Specifications Four Burner Model - B81401(240V) BURNER DATA VOLTAGE 240V AC DIAMETER OUTPUT IN WATTS One 5” (127mm) 800 One 6.25” (159mm) 1200 One 8” (203mm) 1800 One 10” (254mm) 2000/3000 M aximum load 6200 wat t s combined PRODUCT DIMENSIONS WIDTH 24” 609.6mm DEPTH 21.75” 552.5mm HEIGHT 3.06” 77.72mm CUTOUT DIMENSIONS WIDTH 23” 584.2mm Two Burner Large Models - B81311(240V) - B81315 (240V) DEPTH 20.25” 514.4mm RADIUS .25” 6.
Product Specifications Two Burner Small Models - B81321 (120V) - B81325 (120V) - B81331(240V) - B81335 (240V) BURNER DATA VOLTAGE DIAMETER OUTPUT IN WATTS 120V AC Two 6.25” (159mm) 1300 each M aximum load 1800 wat t s combin ed 240V AC Two 6.25” (159mm) 1300 each M aximum load 1800 wat t s combin ed PRODUCT DIMENSIONS WIDTH 21” 533.4mm DEPTH 12” 304.8mm HEIGHT 3” 76.2mm CUTOUT DIMENSIONS WIDTH 20” 508mm One Burner Large Models - B81210 (120V) - B81215 (240V) DEPTH 10.75” 273mm RADIUS .25” 6.
Product Specifications One Burner Small Models - B81201(120V) - B81205 (240V) BURNER DATA VOLTAGE 120V AC 240V AC DIAMETER One 6.25” (159mm) One 6.25” (159mm) OUTPUT IN WATTS 1300 1300 PRODUCT DIMENSIONS WIDTH 12.5” 317.5mm DEPTH 12” 304.8mm HEIGHT 3.19” 81.02mm CUTOUT DIMENSIONS WIDTH 11.5” 292.1mm 8 DEPTH 10.75” 273mm RADIUS .25” 6.
Cleaning and Care Cleaning the Cooktop Do not let anything that melts - plastic, aluminum foil, sugar, etc. come into contact with the cooktop surface when it is hot. Should something melt onto the surface, immediately move it to a cool area of the cooktop with a razor blade scraper and then remove it from the cooktop as soon as possible. If they are allowed to harden the cooktop may become pitted.
Parts and Features of Your Cooktop Throughout this manual, features and appearance may vary from your model. BURNER CONTROL FRAME HOT SURFACE INDICATOR STANDBY LIGHT POWER LIGHT LOCKED LIGHT INDICATES LOCKED UNIT LOCK FEATURE Operation READ SAFETY INSTRUCTIONS BEFORE OPERATING YOUR APPLIANCE These lights are located adjacent to the control panels. When the control is ON, a LED light array will illuminate indicating which burner is on.
Operation Safety Lock Feature Cooking Mode Options 5 6 AND SAFETY LOCK When the LOCKEDMAIN LED POWER is illuminated in the main power control frame, the cooktop touch control power settings can’t be adjusted from the current setting. Pressing either the zone power button or the master power button however, can turn off the cooktop. The LED arc light array will no longer illuminate when in the lock mode. The lock feature can be activated at any time as a safety measure, whether the unit power is on or off.
Operation Temperature Cooking Mode Changing Temperature Units Select the temperature cooking mode by touching the thermometer/gradient graphic within the chosen burner control frame. The temperature units can be changed from Fahrenheit to Celsius by touching the °F/°C button in the main power control frame. All active burners will change accordingly. The chosen default units will remain with every use unless changed.
Operation Timer Options Cooking Timer Each burner has its own cooking timer that can be activated to shut the burner off at the end of the set time. Kitchen Timer The kitchen timer is a general timer that has many uses around the kitchen, independent of cooking activity on the induction cooktop.
Operation SilKEN® 2 MAINTENANCE The Kenyon induction cooktop is a sealed unit that does not require regular maintenance. Please follow our operating instructions as mentioned above. If your SilKEN® 2 requires service, this must be preformed by Authorized Personnel only. Please call Kenyon Customer Care at 860-664-4906. Error Code Readout De-power and re-start the unit to clear the display. Allow the unit to cool as necessary.
Installation IMPORTANT! IMPORTANT! Save this document for future reference. This appliance must be properly installed and grounded by a qualified technician. Save this document for review by local inspector. Important : Conservez ce document aux fins d'examen par l'inspecteur local.
Installation ELECTRICAL SUPPLY REQUIREMENTS KENYON PART NUMBER B81321 B81325 B81210 B81201 B81401 B81311 B81315 B81331 B81335 B81215 B81205 MAX CONNECTED LOAD 1800 Watts 1800 Watts 1800 Watts 1300 Watts 6200 Watts 3600 Watts 3600 Watts 1800 Watts POWER SUPPLY INPUT 120V AC 11A 60Hz 120V AC 11A 60Hz 120V AC 15A 60Hz 120V AC 11A 60Hz 240V AC 26A 60Hz 240V AC 15A 60Hz 240V AC 15A 60Hz 240V AC 6A 60Hz MINIMUM WIRE SIZE #14 AWG #14 AWG #14 AWG #14 AWG #14 AWG #14 AWG #14 AWG #14 AWG 1800 Watts 1800 Watts 13
Installation Countertop Preparation 3 Please read this section prior to making cutout for cooktop. It is important to plan ahead for installation of the cooktop, keeping the following dimensions in mind. A - 13 inches maximum depth of overhead cabinets B - 36 inches is minimum height of countertop above floor C - The minimum flat countertop surface that the cooktop will rest upon must be equal to or greater than the overall cooktop dimensions (refer to the following page for overall cooktop dimensions).
Installation The following is required for this: • A minimum clearance between the bottom of the cooktop and the top of adjacent drawer or other non-heat generating appliance shall be no less than 2”. • The cabinet must have a minimum of two openings; one to allow fresh air to enter and the other for hot air to escape the cabinet. 7 8 6 4 5 • Opening sizes must be equal to 8 square inches each. This is for ambient tempertures of 85ºF / 30ºC and below.
Installation Installing the Cooktop SILICONE TO SEAL THE GLASS EDGE IF DESIRED The cooktop is supplied with two metal mounting brackets. These brackets are designed to hold the cooktop firmly in place. The cooktop does not have a metal frame and should be sealed to the countertop. Use a soft bedding compound that will prevent damage if later removal for service is necessary. We recommend a nonadhesive type of sealant, such as plumber’s putty, maximum compressed thickness of 1/16”.
Installation Electrical Connection 5 Final Preparations Prior to Use Before proceeding further, verify that the power supply is disconnected. Verify that the appropriate electrical supply requirements have been met. Please refer to the table on page 16 for appropriate electrical requirements. The cooktop is supplied with a 36-inch long conduit for a connection to an accessible junction box. The 240V and 208V conduit consists of three insulated wires.
KENYON Statement of Warranty Kenyon International, Inc (the “Company”) warrants its products in normal usage to be free of defects in materials and workmanship subject to the conditions and limitations below. Any part, which proves to be defective in normal usage during the warranty period will be repaired or replaced by the Company. In order for product to be covered under this warranty it must be returned to the Company for evaluation. Please contact kenyonservice@cookwithkenyon.