User Manual

12
STEP #5
Electrical Connection
Beforeproceedingfurther,verifythatthepowersupplyisdisconnected.Verifythatthe
appropriateelectricalsupplyrequirementshavebeenmet.Pleaserefertothetableonpage7
forappropriateelectricalrequirements.Thecooktopissuppliedwitha55-inchlong
conduitforaconnectiontoanaccessiblejunctionbox.The240Vconduitconsistsofthree
insulated wires. There are two insulated hot lead conductors (red and black) and one insulated
groundconductor(green).The120Vconduitconsistsofthreeinsulatedwires.Thereisthe
hot lead conductor (black), the neutral conductor (white) and one insulated ground conductor
(green).
Attach conductor wires to electrical service in accordance with national, state and local
electric codes.
Warning - Grounding
The entire appliance must be grounded at all times when the
electrical power supply is on. Do not ground the appliance with the
neutral house supply wire (white). A separate ground must be used.
Avertissement – Mise à la terre L'appareil doit être mis à la terre en permanence lorsque
l'alimentation électrique est en marche. N'utilisez pas le l de neutre (blanc) de l’installation
résidentielle pour mettre l'appareil à la terre. Un l de mise à la terre séparé doit être utilisé.
!
STEP #6
Final Preparations Prior to Use
Removetheplasticlmfromthecooktop.Cleanthecooktopbeforeyouuseitforthersttime.
A thorough cleaning with a recommended cooktop cleaner (Cerama Bryte Ceramic Cooktop
Cleaner)willprovideaclean,shinycoatingonthecooktopsurface.
Thenextsectionofthemanualcoverscooktopuse,maintenanceandserviceinformation.
Please keep these instructions with the
KENYON cooktop for future reference.