Owner's Manual

Touch Control
To activate an element, rst the master
power must be turned on by placing and
holding a nger for two seconds over
the circular area next to the
master power graphic. An audible beep
will be heard and a light next to the
master power graphic will illuminate.
Then the desired element must be
turned on, by placing a nger over the
circular area marked ON/OFF for that
element. The same beep will sound
and a light will illuminate. Then the heat
level is chosen, by holding a nger over
the circular areas marked with + or -.
Touching the + rst will incrementally
set the heat level from settings 1 thru 8
with a beep and corresponding number
of lights illuminated. Touching the - rst
will incrementally set the level from
settings 8 thru 1 with a beep and
corresponding number of lights
illuminated. When the desired heat
level is reached the nger is removed
and the grill remains at that heat level.
If an element is activated, but no heat
level chosen, the element will
automatically turn off in 7 seconds.
To change the heat level place nger
on + or - graphic of desired element to
change heat level incrementally up or
down.
To deactivate an element, touch circular
area marked ON/OFF to turn the
element off. Also the master power ON/
OFF can be touched and the entire grill
will be deactivated.
13
Fig. 9
B
Element indicator graphic
Element ON/OFF button
- button decreases heat setting
+ button increases heat setting
Element heat
level indicator
Element ON indicator
Element Hot indicator
Master ON/OFF button
Lock button