Series ATE

22
ATE Models with analog meters
Model ATE 15-50DM with optional digital meters
0-15 Volt, 0-50 Ampere model
FEATURES
• Linear programmable power in five sizes to
1000 watts.
• Low noise, high speed linear precision control.
• Voltage and current stabilization.
• 10 turn panel controls offer exceptional
resolution.
• User-selectable capacitorless output for fast
analog programming or
quick recovery current-
mode operation.
Series ATE power supplies are precision
analog-controlled power supplies. They
feature high gain and zeroable offsets
to follow voltage signals or variable resis-
tance controls precisely. An optional fast
mode provides fast programming
response into the mid audio range. The
voltage and current channels are equally
controllable with automatic crossover
between modes.
For a series of full rack sized 1000 watt,
keypad controlled ATE models with built-
in GPIB control, see Series ATE-DMG,
page 28.
Panel mounted analog meters allow monitoring of both channels.
Optionally, ATE models can be provided with digital displays. To
specify, substitute the suffix “DM” for the suffix “M” in the model
number. For example: ATE 36-15DM specifies digital displays.
Local control of both channels is by panel-mounted 10-turn
rheostats. Panel mounted LEDs indicate voltage or current mode
operation. This information is simultaneously delivered as an
optically isolated TTL-compatible flag signal accessible through the
rear connector.
ATE are CE marked per the Low Voltage
Directive (LVD), EN61010-1.
The tabulation of the effective series resistance and inductance
in voltage mode, and the effective shunt resistance and shunt
capacitance in current mode, is done to allow a calculation of the
output impedance versus frequency.
SERIES ATE
KEPCO, INC. • 131-38 Sanford Avenue • Flushing, NY 11352 USA • Tel: [phone] • Fax: [phone]
Email: [e-mail] • www.kepcopower.com/ate.htm