User Guide

MS-3000 MicroStar Reader
Unit 17 Park Farm Industrial Estate 01815-001 Rev. H
Buntingford, Herts SG9 9AZ UK
TEL: + 44 (0) 1763 273 243 FAX: + 44 (0) 1763 274 106
Web: www.kerisys.com E-mail: [e-mail] Page 2 of 8
Quick Start GuideMS-3000
1.2 Operating Voltage
• 5v to 14v DC @ 50 ma
1.3 Cable Specifications
• up to 500 feet using six conductor, shielded, stranded AWG 24 wire (such as Belden 9536)
2.0 Mounting Instructions
Three holes need to be drilled to mount the MicroStar Reader (see Figure 1). One large hole
(0.875" - 7/8") accommodates the beeper and the reader cable. Two small holes are for
mounting the reader on the mullion or door frame (hole size is dependent upon the size of the
mounting screw).
NOTE: Do not mount the reader near sources of Electromagnetic Interference (EMI) such as a
computer monitor. EMI degrades a reader's read range.