User Manual

MS-7000: SuperStar Reader
2305 Bering Drive 01826-001 Rev. G
San Jose, CA 95131 USA
[phone] [phone] FAX [phone]
Web: www.kerisys.com E-mail: [e-mail] Page 1 of 8
MS-7000Quick Start Guide
The MS-7000 SuperStar Reader
The MS-7000 SuperStar Reader is intended for installation in proximity applications where an
extended read range is required. The reader provides an audible beeper and a multi colored LED to
annunciate the reader's status when used on a PXL-250, PXL-100, or IntelliProx.
• Amber - to indicate normal operation awaiting an access event
• Green - to indicate a valid card has been presented or the door has been unlocked for access
• Red - to indicate an invalid card has been presented or the door is in an alarm condition
The MS-7000 SuperStar Reader is housed in a black or white, weatherproof, shock resistant
package. The reader provides optimum performance when mounted at least four inches away from
metal surfaces; read range is reduced if the reader is mounted on or near metal surfaces.
1.0 Specifications
1.1 Dimensions
• 8.50 inches High x 6.00 inches Wide x 0.75 inches Deep
• 21.59 cm High x 15.24 cm Wide x 1.91 cm Deep
Figure 1: MS-7000 Dimensions