Quick Start Owner's manual

PXL-250 Tiger Controller
1530 Old Oakland Road, Suite 100 01835-002 Rev. 4.2
San Jose, CA 95112 USA
[phone] [phone] FAX [phone]
Web: http://www.kerisys.com E-mail: [e-mail] Page 23 of 25
PXL-250Quick Start Guide
5.7 Reader Responses to Access Control Events
During day-to-day activity, the reader will respond to access control events in a specific manner. Table 3 provides a
summary of the reader's LED and beeper actions during access control events.
6.0 General Information on Inputs
A controller input detects a state change generated by a device outside the controller that may prompt a response from
the controller. Input devices that generate a state change may be normally closed or normally open. This section
provides a brief description of normally closed versus normally open inputs.
Table 3: Reader Responses to Access Control Events
Event Reader’s LED Status Reader’s Beeper Status
waiting for an
event
displays a steady Amber LED silent
access granted displays a Green LED until the door is closed or
the door unlock time is reached
one long Beep
access denied flashes a Red LED one short Beep
door alarm flashing Red LED for the duration of the alarm condition pulsating Beep for the duration of the
alarm condition
door RTE displays a Green LED until the door is opened or the door
unlock time is reached
one long Beep