Quick Start Owner's manual

PXL-250 Tiger Controller
1530 Old Oakland Road, Suite 100 01835-002 Rev. 4.2
San Jose, CA 95112 USA
[phone] [phone] FAX [phone]
Web: http://www.kerisys.com E-mail: [e-mail] Page 6 of 25
Quick Start GuidePXL-250
4.0 Wiring Instructions
Refer to Figure 1 on page 1 for all wiring connections.
4.1 Terminal Blocks
Figure 2: Connecting Wires and Removing Terminal Blocks
NOTE: Screws on terminal blocks must be tightened securely.
4.2 Connecting the Earth Ground and the 12 VDC Power
Figure 3: Earth Ground and 12 VDC Power Connections
NOTE: TB2 is colored red to make it easier to tell it apart from the network connector.