Manual

TAP 100 Application Software Manual
Page 52 Revision 3.3
If you are not satisfied with your entry, use your pointing device and select QUIT to exit the
selection without making a change. If your entry is correct, use your pointing device and select
OK. The following prompt box will appear asking you to confirm this entry.
If you are satisfied with your entry, use your pointing device and select YES/OK. Otherwise, use
your pointing device and select NO/CANCEL.
To assign time zone and holiday access information for a cardholder on a reader-by-reader basis,
use your pointing device and select Access. A listing of all readers will be displayed.
Use the arrow keys and arrow up or down until the reader to be assigned time zone values is
highlighted. Use your pointing device and select Modify. A listing of all time zones will be
displayed.
Access Authorization Selection
Choose a time zone to be applied to all readers.
0Always
1 07:00 - 18:00 So Mo Tu We Th Fr Sa
2 15:00 - 00:30 So Mo Tu We Th Fr Sa
3 23:30 - 07:30 So Mo Tu We Th Fr Sa
[ ] Holiday Access
4 07:00 - 16:00 So Mo Tu We Th Fr Sa
OK QUIT
All levels in this slot will be set to TZ 4 (hol)
DO YOU REALLY
WANT TO DO THIS?
YES/OK NO/CANCEL
Access Rights for Slot 1
Cardholder Name:
READER NAME TIME ZONE TZ# HOL
no name 1-A Always (00) HOL
no name 2-A Always (00) HOL
no name 3-A Always (00) HOL
MODIFY
BLOCK
PRINT
OK
QUIT
HOLIDAYS - ALL HOLIDAYS - NONE
EMP ENTRANCE Always (00) HOL