For ecological reasons, this guide has been printed on recycled paper WanesyTM Wave Quick Start Guide Thank you for choosing Kerlink. We are proud to be part of your project.
1. Need help? • • • In order to provide the most updated technical documentation, as well as considering and saving the environmental resources, Kerlink is preferably providing “Online documentation”. Kerlink is gathering all the technical information on a Wiki: http://wikikerlink.fr/ ͳͳ If you don’t have yet your Wiki login/password please request them to support@kerlink.com (note that the “Product ID” of one of your products will be required).
• For any Warranty or Maintenance related request (Trouble shooting, help …), - If purchased from a distributor, please contact the Distributor directly for Level1 support. - If purchased from Kerlink directly, please open an “Assistance Request” via our online ticketing tool called OTRS (Open-source Ticket Request System). - If you don’t have yet your OTRS login/password, please request them to support@kerlink.com (note that the Product Id or any serial number of one of your products will be required).
5.
• The Wanesy™ Wave enclosure must be mounted on any concrete pedestal, concrete wall or any non-flammable surface (UL94-V0). • It must not be mounted on a flammable surface. 6.2 Setting connections In order to connect the Wanesy™ Wave, you just have to plug the product on the micro-B USB power supply. The Wanesy™ Wave is powered by micro-B USB 5Vdc ±5% / 1A. Please check accessories preconized by Kerlink. Operating temperature range: -20°C to +55°C Humidity: 5% to 95% Altitude max. < 2000m 6.
Please contact your reseller to know the LEDs behavior if the applicative software installed on the Wanesy™ Wave is not the one officially provided by KERLINK. For more information on the Quick start of Wanesy™ Wave Gateway, please consult the Kerlink Wiki: http://wikikerlink.fr/wanesy-productline/wave 7. Declaration of Conformity 7.1 Wanesy™ Wave 868 Simplified EU Declaration of Conformity Hereby, Kerlink, declares that the radio equipment type Wanesy™ Wave 868 is in compliance with Directive 2014/53/EU.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
9. Warranty Contact your reseller for warranty conditions of the WanesyTM Wave. The Wanesy™ Wave is not warranted by Kerlink in case the enclosure is opened, modified, painted, branded out, outligned by CUSTOMER for any reason. Feel free to contact us for a guideline for the branding. 10. Accessories and Professional Services For additional information, on available accessories and Professional Services please contact your reseller. 11.