Owner's manual

82 ABS-N_ABJ-NM-BA -e-1312
16.3 Communication parameters
By calling-up a standard setting „MODE 1 - MODE 5“ all communication parameters
are already preset (see chpt. 16.3.1).
The subsequent standard setting must be selected according to the printer (details
see the following table).
In the menu item „MODE U“ all parameters can be set defined by user (see chpt.
16.3.2).
Standard
setting 1
Standard
setting 2
Standard
setting 3
Standard
setting 4
Standard
setting 5
User-defined
settings
Setting for
KERN –
YKB-01N
Menu
selection
MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 MODE U MODE U
Manufactu
rer
Shimadzu
(Standard)
Shimadzu
*
Mettler Sartorius A-D - -
Baud Rate 1200 1200 2400 1200 2400
user-
defined
1200
Parity None (8) None (8) Even (7) Odd (7) Even (7)
user-
defined
None (8)
Stop bit 1 1 2 2 2
user-
defined
1
Hand-
shake
Hardware Hardware off Hardware off
user-
defined
off
Data
format
Shimadzu
Standard
Shimadzu
Standard
Mettler
Standard
Sartorius
Standard
A-D
Standard
user-
defined
DF.1
Separator C/R C/R C/R + L/F C/R + L/F C/R + L/F
user-
defined
C/R
*only if the balance can send a feedback to the PC (without error: OK [C/R], at error NG [C/R].