Owner manual

118 AET_/PET_/ILT_NM-BA-e-1410
25.1. Working mode activating procedure
Procedure:
• while in the main window, press soft key located in the upper bar of the
display, which opens a submenu <Working modes> with selection of
available working modes,
• select < SQC>, mode, the software automatically returns to the main
window and displays pictogram in the upper bar,
• Simultaneously, the message bar displays a command <Start control > and
a soft-key on control start is visible in the bottom tool bar:
Start control
Control start procedure:
• Starting a control process requires logging a user with corresponding access
level.
Caution:
1. Starting a control requires that an access level of the logged user is at
least a <user>. If a logged user or an anonymous user have access level
set to <guest> then on control start the software opens a message box
informing on: <Unauthorized access>.
2. Logging procedure is described in point 9 of this user manual, and
procedure determining access level for each user is provided in point 13 of
this user manual.
• Set general settings of working mode parameters to balance memory
< SQC>, description in point 25,
Select a needed product (by pressing a corresponding soft key
< > in the bottom bar or using balance’s keyboard with correctly determined
data on a control: