User Manual

CXB/CXP-BA-e-1016

7.2.2 Scope of delivery

Serial accessories:

CXB models CXP models

 Balance  Platform

 Weighing plate  Terminal

 Mains power supply  Mains power supply

 Protective cover  Protective cover

 Internal battery  Internal battery

 Operating Manual  Operating Manual

7.3 Mains connection

Power is supplied via the external mains adapter. The stated voltage value must be

the same as the local voltage.

Only use original KERN mains adapters. Using other makes requires consent by

KERN.

7.4 Battery power supply

The optionally supplied battery is charged with the supplied power supply.

Before the first use, the battery should be charged by connecting it to the mains

power supply for at least 15 hours. The battery has a service life of c. 200 hours

without background lighting or 60 hours with background lighting. The charging pe-

riod for total charge is c. 8 hours

The appearance of the battery symbol in the weight display indicates that the

battery is almost exhausted. If no weighing process is carried out during the red LED

display, the balance will switch off automatically after about 20-30 minutes. Connect

the power adaptor as soon as possible to change the battery.

The LED display provides information about the battery's charging status.

red: Battery is almost discharged

green: Battery is completely discharged

7.5 Initial Commissioning

In order to obtain exact results with the electronic balances, your balance must have

reached the operating temperature (see warming up time chap. 1). During this warm-

ing up time the balance must be connected to the power supply (mains, accumulator

or battery).

The accuracy of the balance depends on the local acceleration of gravity.

Strictly observe hints in chapter Adjustment.