Manual
Table Of Contents
- 1 Technical Data
- 2 Basic Information (General)
- 3 Basic Safety Precautions
- 4 Transportation & Storage
- 5 Unpacking, Setup and Commissioning
- 6 Operation
- 6.1 Starting the scales and switching on the screen
- 6.2 Menu paths for basic settings / operating modes
- 6.3 Operator/location selection
- 6.4 Starting the stock-tacking
- 6.5 Article selection – Inventory calculation and saving
- 6.6 Inventory deletion / Article repeat / Inventory list
- 6.7 Stock-taking with automatic list:
- 6.8 Scanner selection
- 6.9 Automatic registration activation:
- 6.10 Operator and location input
- 6.11 Activation / Deactivation of zero passing
- 6.12 Data Transfer PC-FKA, FKA-PC at inventory / article counting:
- 6.13 Creating a stock list
- 7 Data output RS 232 C
- 8 Service, maintenance, disposal
- 9 Instant help
- 10 Declaration of conformity
- Electronic Balance: KERN FKA
6.3 Operator/location selection
Select operator:
Press the Operator button to access the
selection fields
for authorised operators.
Select the current operator.
If no operators are available, they must
be re-entered via MENU / CONFIGU-
RATION / MEMORY / OPERATOR /
DESIGNATION (G9).
In the second information line appears
now the selected operator (see arrow).
Now press the Location key.
Select location:
Press to select the correct stock-taking
location from the selection fields dis-
played.
If no storage locations are available,
they must be re-entered via MENU /
CONFIGURATION / MEMORY / AREA /
DESIGNATION (G11).
20 FKA-BA-e-1414