User Manual
HCB-BA-defsi-0421
7
9 Troubleshooting
The balance should be switched off for a short time following an interruption in the programme sequence. It is then necessary to
repeat the weighing process from the beginning.
Interruption Possible cause
• The balance is not switched on.
Weight display is not illumi-
nated.
• The batteries are wrongly inserted, the batteries are empty
• No batteries are attached
• Draught/air movement
• Table/floor vibrations
The weight display changes
continually
• Vibrations on the balance suspension
• Electromagnetic fields / static charging (choose different location/switch off interfering
device if possible)
• The balance display is not set to zero
• Adjustment is no longer correct.
The weighing result is obvi-
ously incorrect
• Great fluctuations in temperature.
• Electromagnetic fields / static charging (choose different location/switch off interfering
device if possible)
Switch the balance off if other error messages should appear and then switch on again. Contact the manufacturer if the error
message does not disappear.
Important using informations
NO NO O.K.
- Don’t use with pressure - Don’t twist - Just using with tension