Manual

168 KEN-TM / KET_TM-BA-e-1420
16.3 Detailed information about interface logs
16.3.1 Zeroing
Befehl: Z CR LF
Possible responses:
Z˽A CR LF
Z˽D CR LF
Command accepted; executing command
Execution of previously started command completed
Z
˽
A CR LF
Z˽^ CR LF
Command accepted; executing command
Command valid but zero setting range was exceeded
Z˽A CR LF
Z˽E CR LF
Command accepted; executing command
Time limit for stabilisation of weighing scale display was exceeded
Z˽ CR LF
Command valid but can currently not be executed
16.3.2 Taring
Command: T CR LF
Possible responses:
T˽A CR LF
T˽D CR LF
Command accepted; executing command
Execution of previously started command completed
T
˽
A CR LF
T˽^ CR LF
Command accepted; executing command
Command valid but tare range was exceeded
T˽A CR LF
T˽E CR LF
Command accepted; executing command
Time limit for stabilisation of weighing scale display was exceeded
T˽I CR LF
Command valid but can currently not be executed