Manual

KEN-TM / KET_TM-BA-e-1420 85
9 Weighing
The default setting for the weighing scale in the application is weighing.
How to carry out a simple weighing process is described in chap. 6.9 “Basic operation“
Apart from the operating steps described therein (simple weighing, zero setting, taring,
selecting weighing unit) the weighing system also offers additional options for
customising application “Weighing“ to your specific requirements.
For selecting application, see chap. 8.1
For selecting application specific settings, see chap. 8.2
The following settings are available for application “Weighing“:
Storage mode see chap. 9.1.
Dispensing see chap. 9.2.
Checkweighing see chap. 9.3.
Tare mode see chap. 9.4.
Labelling mode see chap. 9.5..
Statistics see chap. 9.6.
Differential weighing see chap. 9.7.
Peak hold see chap. 9.8.
Info about saved weighing activities see chap. 9.9.