Manual

12 KFA V20-IA-e-1312
8 Service, maintenance, disposal
Before any maintenance, cleaning and repair work disconnect the
appliance from the operating voltage.
8.1 Daily check
 Ensure that all four feet are in contact with the floor.
 Ensure that cables are not damaged.
 Ensure that the weighing beams are free of soiling, in particular underneath the
edges.
8.2 Cleaning
! Remove regularly corrosive substances.
! Keep IP protection.
! Do not aim water or steam jet at the weigh cells.
 Clean weighing beams using a soft cloth soaked in a mild detergent. Take care
that the device is not penetrated by fluids and polish it with a dry soft cloth.
8.3 Service, maintenance
 The appliance may only be opened by trained service technicians who are
authorized by KERN.
 Ensure that the weighing system is regularly calibrated, see chap. 3.5 Testing
instruments control.
8.4 Disposal
 Disposal of packaging and appliance must be carried out by operator according
to valid national or regional law of the location where the appliance is used.