Operation Manual

CAUTION: NEVER LIGHT YOUR HEATER WITH

MATCHES OR A LIGHTER OR OTHER FIRES

LIGHTING THE HEATER

Move from side to side

Before you light the heater, check the

following points:

The combustion cylinder must be proprely positioned. Make

it rotate pushing the lever from left to right and make sure it

is correctly fitted.

When you use the heater for the first time, odours may

persist for a certain time after lighting. This is normal, as oil

and protective grease in the heater have to be burnt off.

Slowly push the ignition lever downwards until it stops and

keep the knob downwards. The wick will rise and the heater

ignites automatically. Check visually that the heater is alight.

After having carried out the ignition procedure, there may be

some white smoke coming out of the ignition zone, without

the heater being lit. In this case, move up the ignition lever

part way through its travel and the heater will start to

operate. This operation must be done slowly and gently.

Try several times if lighting is not carried out in the 2 or 3 se-

conds. In the event of insistence, you risk to roast the lighter

or the wick (spare parts non garanty).