base Pull Out II Mountig instrucion http://www.cleverstorage.com/technical-support/ base Pull Out II max. 27,5 kg 60 lbs 1 21 3 fasteners are not included pan head Optional: Lateral bar kit neccesary for cabinets with a drawer Kesseböhmer MA 403792 0000 Rev.
Base Pull Out II Symbole · Symbols · Symboles · Simboli · Símbolos · Símbolos · Merkit · Symboler · Symboly · Symbole Символы · Semboller · Σύμβολα · 記号 · 标志 PZ-2 DE IT FI PL TR JP DE IT FI PL TR JP DE IT FI PL TR JP DE IT FI PL TR JP DE IT FI PL TR JP DE IT FI PL TR JP DE IT FI PL TR JP DE IT FI PL TR JP DE IT FI PL TR JP DE IT FI PL TR JP DE IT FI PL TR JP DE IT FI PL TR JP Warnung! Avvertenza! Varoitus! Ostrzeżenie! Uyarı! 警告 UK ES DK RU GR Warning! ¡Advertencia! Advarsel! Внимание! Προειδοποίηση!
Base Pull Out II Check your cabinet construction 2 Use a shim / door stop if needed door stop only for inset doors min. 64mm (2½“) min. 64mm (2½“) 1 min (mi . 95m n. 3 m ¾“) m 0m . 57 2½“) n i m in. 2 (m min. 508 mm, max. 711mm (min. 20“, max. 28“) max. 6,3mm (max. ¼“) min. 610 mm, max. 813mm (min. 24“, max. 32“) flush Kesseböhmer MA 403792 0000 Rev.
Base Pull Out II 3 Using templates faceframe overlay frameless 5a 4x Mount top runner parts panhead to your full height cabinet faceframe inset e cent rline use top runner as a template 25,5mm (1“) e erlin 25,5mm (1“) cent frameless 38mm (1½“) parts to your cabinet Use panhead screw min. Ø4mm (3/16“) 25,5mm (1“) panhead 25,5mm (1“) 4 8x Mount bottom runner faceframe overlay 38mm (1½“) drill hole positions skip to page 6 Kesseböhmer MA 403792 0000 Rev.
Base Pull Out II 4x 5b panhead Mount top runner parts to your drawer cabinet using the lateral bar CW fasteners are included = CW = 39.5 mm (1 9/16“) frameless 25.4 (1“) 39.5 mm (1 9/16“) faceframe overlay 39.5 mm (1 9/16“) adjust proper height and secure with two more panheads Kesseböhmer MA 403792 0000 Rev.
Base Pull Out II Drilling positions bottom runner 86mm (3⅜“) Kesseböhmer MA 403792 0000 Rev.
Base Pull Out II X Adjust the frame height to your cabinet X+25mm (1“) = X+25mm (1“) 1 21 1 3 21 3 1 X 21 3 1 21 3 X X 9 3 mm Kesseböhmer MA 403792 0000 Rev.
Base Pull Out II 10 Mount the door brackets to the frame fasteners are included 11 6x are not included use panhead Optional wide door bracket neccesary for cabinets 18“ or wider Mount the unit to the door using the door template 2x 4x Kesseböhmer MA 403792 0000 Rev.
Base Pull Out II are not included use panhead Drilling positions of the door 21 X 21 1 1 21 3 3 1 1 2 13 X 3 X X 12 6x 63,5mm (2½“) 59mm (2 5/16“) overlay door inset door Z 66mm (2⅝“) Z 78mm (3 1/16“) door bracket 18“ or wider 25mm (1“) Y door Z=19mm (¾“) - Y 44,5mm (1¾“) X+20mm (25/32“) Y door 11mm (7/16“) Z=19mm (¾“) + Y 121mm (4 ¾“) Kesseböhmer MA 403792 0000 Rev.
Base Pull Out II 13 Assemble the frame to the runner C Kesseböhmer MA 403792 0000 Rev.
BasePulOutI 14 Adjustments PZ-2 = Side to side adjustment. Angle adjustment. Kesseböhmer MA 403792 0000 Rev.
Base Pull Out II Installing the shelves Door 15 Install shelves resting the front edge first, then engage the back hooks. Don‘t push on side rails to install!. If metal shelves are used in lowest position then apply rubber bumpers! Subject to technical modifications without notice. Kesseböhmer MA 403792 0000 Rev.