Operation Manual

Menu
KETRON • AUDYA 129
▀
Recording a MIDI file from the MIDI IN port
1. Press the MENU button and the F9 button
(MIDI RECORDING) to enter the MIDI recording
environment.
2. You will be prompted to give a name to the file.
Digit the name for the MIDI file, directly from the
keyboard.
3. Press the F2 button (MIDI PORT IN GM) to set the
data recording mode from the external port (Figure
336).
4. Press the USER 5 button (START REC) to start
the MIDI recording.
5. Start the external MIDI sequencer or play any MIDI
keyboard connected to the MIDI IN connector.
6. Press the USER 4 button (STOP REC) to stop
MIDI recording.
7. A file in the MIDIFILE folder of the disk will be
created.
8. To browse and listen the recorded MIDI file, press
the MIDI button in the Player section.
▀
MACRO RECORDING
The MACRO RECORDING records all the events
performed on the keyboard (Figure 337).
The files have the extension .MRS and are saved
into the MIDI folder from where it is also possible to
reproduce them.
Once the Macro Recording feature is selected, the
display will show a sub-menu with the possibility to
assign a name and other options (Figure 338).
• Macro Restore: if set to On, at the end of the
Macro Recording sequence will be automatically
restored all the previous panel conditions of the
machine before the Macro performance.
• Macro Rec Keyb.: Enable/Disable for the
keyboard recording.
• Macro Play Keyb.: Enable/Disable for keyboard
playing during the Macro reproduction.
• Macro Play Tab: Enable/Disable for the panel tab
functioning during the Macro playback.
• Sync Start Rec: this function permits to start
automatically the Macro recording as soon the
Style is activated. In order to use this feature it’s
enough to exit by pressing the tab Menu and then
return to the Main View: doing Start to the Style
the MACRO will begin it’s recording.
• Sync Stop Rec: the feature allow to stop the
Macro recording with the Stop fo the Style.
▀
Macro Recording & Playback
Once a name is given and the various options are
selected, it is possible to start the Macro Recording
by pressing the tab START REC (user 5/10).
All the following events produced on Audya such
as voice selection, style changes, player and any
other feature, except for Microphone signal, will be
recorded.
During the Macro Recording all Menus are
deactivated.
The end of the performance is achieved by pressing
STOP REC or RECORD.
In order to start the playback just go into MIDI folder,
select the file .MRS and press Enter.
▀
Macro and Registration
While recording a Macro you cannot access a
Registration. If you want to record a Macro using one
Registration setting, you can launch the Registration
first and then the Macro Recording. When the Macro
will be executed, it will automatically set the initial
values, also the previously selected Registration.
WARNING
If you make a MIDI recording using an Audio Drum part
for the drum, the drum sounds (AUDIO) will not be
recorded into the MIDI recording. If you want to record
an Audio Drum please use the audio recording method.
Figure 336
Figure 337
Figure 338