Operation Manual

KETRON • AUDYA 59
NOTE
You can activate wha-wha effect as User Assignable
control.
Program
Figure 121
Figure 122
Cutoff: changes the cutoff of the filter
Pit+Cutoff: changes pitch and cutoff
Pitch+Filt: changes pitch and filter
Pitch+Ampl: changes pitch and amplitude
Pit+Fil+Amp: changes pitch, filter and amplitude
Pi+Fi+Am+Cut: changes pitch, filter, amplitude
and cutoff
Slide 1, Slide 2, Slide 3, Slide 4: applies a slide
effect
Slide Bend: applies a note bending
Soft Pitch: applies a slight untuning
By pressing the CURSOR Ó Á buttons together
you can switch the parameter OFF.
•
F3/F8–MOD/WHA (Figure 121): you can assign
a Modulation wheel control to each VOICE. For
example:
Pitch: changes the pitch
Filter: changes the filter
Amplitude: changes the amplitude
Cutoff: changes the cutoff of the filter
Pit+Cutoff: changes pitch and cutoff
Pitch+Filt: changes pitch and filter
Pitch+Amp: changes pitch and amplitube
Pit+Fil+Amp: changes pitch, filter and amplitude
Wha To Pedal: applies a wha-wha effect to the
pedal
Wha To Wheel: applies a wha-wha effect to the
wheel
•
F4/F9–BEND (Figure 122): you can assign a
Bend control to each VOICE. For example:
Pitch: changes the pitch
Pit+Ampl.: changes the pitch and the amplitude
Pit+Cutoff: changes pitch and cutoff
Pit+Amp+Cutt: changes pitch, the amplitude and
the cutoff
Pit+TVF: changes pitch and the envelope of the
filter
Pit+LFO: changes pitch and LFO amount
Preset Edit allows to modify and save on Program (
see Preset Edit )
▀
Pre
set Edit
You can edit presets and save again the Program
(without altering the original presets).
By using F1-F10 you can select the preset and
hold the button for about 1 sec. Then edit the
sound, name, choose the destination and SAVE
the Program.