Operation Manual

7
the actual song. If you wish to maintain the playing
performance and rapidity of the MIDJAY unit also in
a directory that contains lots of files, you can switch
this function OFF. In this way, the searching function
of the song file is inhibited and the starting time of
the files selected is drastically reduced.
NEW MENU FUNCTIONS OF THE MONITOR
From the Mode/Function menu (activated using the
MENU key) you can access the settings of the Monitor
(Monitor Settings). The Txt Line Number function has
been added to this menu, which is used to choose
the number of lines of words to be displayed on the
monitor. When the value is 5, the page shows 5 lines
of words and the characters will be larger than those
used to display 10 lines. The settings of the monitor
can be saved in the MONITOR.INI file by pressing the
SAVE key. Remember that the settings of the monitor
and of the built-in display are independent.
REGISTRATION FILTERS
In the contextual menu of the REGISTRATION menu
(activated using the EDIT key) it is now possible
to set which functions and which parameters are
to be modified by the Registration. By enabling or
disabling the various items within the Registration
Filters menu you can establish which parameters will
be left unaltered when a REGISTRATION is loaded.
The parameters set can be saved in the MACHINE.
INI file and automatically loaded again when the
instrument is started.
DJLOOP CHAIN
This function is used to program and save a sequence of sections for a DJLOOP in order to create an actual song produced using the audio
parts of the file. To record a sequence, you need to load a DJLOOP (Enter on the file name), activate the contextual menu using the EDIT
key and select the Record Chain item. Once the function is activated, the machine is ready to record. A small R within two square brackets
[R] appears at the bottom of the main page of the DJLOOP to point out that the instrument is recording. Start recording the DJLOOP by
playing the various sections and stop recording using either the STOP key or the
Ending function of the actual file. To play back the sequence recorded, activate the
Play Chain item or press key 0 (PLAYLIST section). By pressing the SAVE key, you
can save the sequence within the current DJLOOP so that it is then available each
time the actual DJLOOP is loaded again.
GROOVE REMIX
With release 4.0 you can synchronise a Groove (.GRV) with a midifile and use it as a rhythmic audio base with which you can remix the
midifile in the same way as for the Drum Remix procedure with internal Styles. To associate a Groove with a midifile you need to play the
midifile (Enter on the name), select the Groove section with the relative key, activate the Remix procedure with key 9 (PLAYLIST section)
(LED lit) and load the Groove required. At the end of the loading time, the Groove
will be played in synchronisation with the midifile. The rhythmic and percussion
parts of the midifile will be muted. By then pressing key 9 (PLAYLIST section) you
can re-activate the rhythmic parts of the midifile and play them over the Groove.
While playing, you can alternate the various sections of the Groove (Arr A, Arr B,
Arr C, Arr D) or add some fills or Breaks using the relative buttons (Fill, Break). To
N
EW MENU FUN
C
TI
O
N
S
O
F THE M
O
NIT
O
R
R
E
G
I
S
TRATI
O
N FILTER
S
DJ
L
OO
P
C
HAIN
G
R
OO
VE RE
M
IX