Operation Manual

9
Untitled_xxx in the main directory of the WAVE folder (C:\WAVE) and numbering it progressively. The numbering goes from 0 to 999. The
function can also be activated with the Footswitch.
SD5 INTERFACE
The MIDJAY unit can be controlled remotely from the new Ketron SD5 keyboard.
Release 4.0 implements a special MIDI communication protocol via which you
can view and activate all the files in the HD of the MIDJAY unit directly from the
display of the SD5 keyboard. Once communication has been established, the MIDI
connections of the MIDJAY unit (IN/OUT) are disabled and used just to communicate
with the SD5 keyboard. You can check the status of the connection in the MIDI
menu; SD5 Connect ON will appear if communication has been established.To set the Midi connections of the MIDJAY unit back in their
normal operating mode you need to manually set the SD5 Connect parameter OFF.Consult the instruction manual of the SD5 keyboard for
further information.
WAVE SONG SETUP
It is now possible to set-up the songs in Wave format. In particular, you can save the transposition set, the algorithm selected (Wave
Transpose Mode) and the setting of the Lead Mute in the file. In this way you can customise the key and the sound of a wave file simply
and immediately. To save a Setup, select the file and play it (Enter key), execute the transposition by activating the relative box using the
Transpose key. If you wish, you can modify the transposition Mode by activating the relative selection menu using the Edit key.Save the
Setup by pressing the SAVE key. The next time the Wave file is started, the transposition value and the status of the Lead Mute will be set
according to the information saved in the song Setup. It is important to remember that the original file is not modified.
R.TIME TO WAVE AND R.TIME TO MP3
It is now possible to control the Starting and Stopping of a Wave file and/or Mp3 file using the midi real time controls (Real Time Midi
Events). You can control the starting and stopping when playing back a Wave file or an Mp3 file, from an external sequencer or from a
keyboard in which the Midi Clock Out function has been activated. The activation of the R.Time to Wave and R.Time to Mp3 options of the
Midi->Filter&Clock menu determines whether the Wave files or Mp3 files respectively are to be affected by this type of event.
MIDIFILE MASTER TRANSPOSE
It is now possible to set a Global transposition value to be applied to all the midifiles played on the machine. The transposition value set
is added to that possibly saved within the midifiles (saved with the Song Setup procedure) or set manually on the control panel of the
MIDJAY unit.
MIDIFILE KICK&BASS BOOST
This allows you to soften or enhance the audio levels of the percussion instruments belonging to the bass drum family (kick) and of the
sounds related to the family of electric guitars (freetles, finger etc.) by a preset quantity. The parameter affects all the midifiles being
played and can be saved in MACHINE.INI using the PowerOn setup procedure.
MISCELLANEOUS
The functions of the Power On Setup have been extended, which implement and saves the Audio Local, Format and Sampling Rate
parameters in the HD Recording menu.
Hold the arrow keys down to scroll the current directory forwards by pages and not by single files. The first time you press the key,
the current position of a single file is modified, then the position is modified by page in page.
The functions of the Footswitches have been extended by adding the following functions:
Bass&Drum and BassToLowest.
Easy Hd recording.
The possibility of saving the volume of the vocalizer in the Song Setup of a midi base has been added.
The midi reception of the volume on the channel of the automatic bass has been enabled.
It is now possible to save the Lower Off within the Registrations
The synchronisations of the Karaoke on Mp3 files have been optimised.
S
D5 INTERFA
C
E
M
IDIFILE KI
C
K
&
BA
SS
B
OOST
M
IDIFILE
M
A
S
TER TRAN
S
P
OSE
R.
TI
M
E T
O
WAVE AND R
.
TI
M
E T
O
M
P
3
M
I
SC
ELLANE
OUS
W
AVE
SO
N
G
S
ETUP