Operation Manual
2
3
SAFETY INSTRUCTIONS
AC Power Adaptor
To connect the instrument to the wall socket you will need the supplied KETRON AC Power Adaptor.
Use of other AC adaptors could result in damage to the instrument’s power circuit. So be sure to ask for the right kind.
Instructions About Risk of Fire, Electric Shock or Injury to Persons
Warning: to reduce the risk of re or electric shock, do not expose this instrument to rain or moisture.
Earthing: his product must be connected to an earthed outlet. In case of malfunctioning, the earthing will reduce the risk of
electric shock. The instrument comes with an earthed power cable and plug to be used with an earthed outlet.
Improper earthing connections may cause electric shocks. In case of doubts, have your electric installation checked by a
qualied electrician.
Do not modify the power cable coming with the instrument.
Important Safety and Installation Instructions
• Before using this instrument, carefully read the User’s Manual.
• When the instrument is used by children, the presence of an adult is required.
• Do not use the instrument near water, for example near a wash-basin, a swimming-pool, a wet surface, etc.
• Power Supply. Before connecting this instrument to any other equipment (amplier, mixer, other MIDI instruments, etc.)
make sure that all units are switched off.
• Do not play the instrument at a high volume for a long period of time: exceedingly loud music can cause damage to
your health.
• The instrument is to be used in a position where adequate ventilation is provided.
• Use the instrument far away from heat sources such as radiators, heaters, etc.
• Disconnect the power cable if the instrument is not used for longer periods of time.
• Be careful to avoid any objects or liquids from falling into the inside of the enclosure.
• Bring the instrument to an service centre in the following cases:
a. Damages on the power cable or plug.
b. Objects or liquids fallen into its inside.
c. The instrument has been exposed to rain.
d. Abnormal running or an evident decrease of the instrument’s performance.
e. The instrument has fallen down or the enclosure has been damaged.
• Never try to repair the instrument yourself. All operations must be performed by specialised engineers.
How to Avoid Radio/TV Interference
This instrument operates at radio frequencies, and if not correctly installed according to the instructions supplied, it may
cause interference with radio and television reception.
Though this instrument has been designed according to the applicable standards and notwithstanding the reasonable
protections against interference it has been equipped with, there is no guarantee that such events will not occur. In order
to check if the interference is actually caused by this instrument, switch it off and see if the interference disappears. Then
switch it on again and check if the interference appears again. Once you have made sure that the interference is originated
by this instrument, take one of the following measures:
• Turn the radio or TV antenna in a different direction.
• Modify the instrument’s position with respect to the receiver.
• Increase the distance between the instrument and the receiver.
• Connect the instrument’s plug to a different outlet to make sure that the instrument and the receiver are connected to
two different circuits.
• If necessary, contact a specialised technician.
How to Clean This Instrument
Use only a soft and dry cloth to clean the external surface of your instrument. Never use petrol, thinners or solvents
generally speaking.
In Order Not to Loose Data
Please remember that the data stored in the instrument can be deleted at any time in case of abnormal running conditions.
We therefore advise to carry
out back-up copies of your data during the various programming phases.