Operation Manual

4
5
1 2 3 4
5 6 7 8
10
9
11
12
13
OUTPUT / CONNECTIONS
1 Out Micro: Separate output for the microphone to be directed toward the external amplier.
2 Out Right - Left / Mono: Stereo output to connect to your stereo equipment/PA/Mixer, etc.
3 Out Monitor: For the connection to a Computer monitor. In order to connect the device to a TV (home TV
or similar equipment), it is necessary to use a PC/Mac video converter for TV. This product is distributed
by Ketron or can be purchased in stores that sell Computer equipment.
4 MIDI In/Out/Thru: Output for MIDI connection toward devices equipped with this type of interfacing.
5 USB: USB component for the connection of the MIDJAY to the Computer. This type of connection is
recommended for the procedures of transfer and reorganization of Files.
6 Headphone: Output for the connection to stereo headphones.
7 Micro In: Input for the connection of the microphone.
8 DC 9V Power In: Connector for the MIDJAY’s dedicated power supply unit.
Important: Use only the power supply unit provided with the MIDJAY.
9 ON/OFF: MIDJAY’s ON/OFF switch.
10 Line In - Left/Right: Input for external audio line. Through the Line In slider, this connection can be used to
control the volume of external equipment (like a CD Player, a Dat, or to record in HD Recording Mode).
Warning: When the MIDJAY is connected to a Mixer, and the mixer’s output is redirected toward
the Line In input, a common audio LOOP effect can take place. Such occurrence could be very
dangerous for the monitors connected to the system (especially for tweeter monitors). In order to
avoid this inconvenience, use the Local OFF function (See Hard Disk recording - Edit).
11 Click: Output for metronome Click. Direct this output toward a Mixer or a headphone amplier. The direct
connection to typical headphones (passive) will not ensure sufcient volume.
12 Micro Gain: Slider to control microphone Gain input
13 Footswitch: Connection for Ketron FS6 - FS13 Footswitch. This component is used as a foot pedal to
control several functions, like Start, Stop, Fill, etc.