Operation Manual

Owner’s Manual SD1

F1 Direct: allows you to define the quantity of audio signal to be drawn from the Micro 1 input and to be used together with

the Vocalizer effect. This can be modified with the VALUE +/- buttons.

F2 Vocalize: controls the quantity of Vocalizer processed signal present on the audio output. To be modified by acting on the

VALUE +/- buttons.

F3 Modes: pressing repeatedly the F3 function button modifies the harmonisation mode and, as a consequence, the available

algorithms displayed at the centre of the display that can be selected with the CURSOR +/- buttons.

F4 Octave: transposes the voices that have been added to the lead by +/- two octaves. When set on Automatic, the voices will

remain within the octave of the note that has been sung. Can be modified with the VALUE +/- buttons.

F5 Hold: this will be present only if the harmonisation mode is set on Keyboard Harmony; if activated, this function allows

you to store the notes recognised by the Vocalizer.

F6 Effects:

this allows you to modify the effects settings, to apply the Vibrato and the Limiter, to modify the vocal timbre and

to activate a number of modulations. The Reverb and the Delay are the general ones and are programmable. The

parameters are selected with the CURSOR +/- buttons and the value is entered with the VALUE +/- buttons. To go

back to the main page of Vocalizer Edit, press once more the F6 Effects function button.

In the following the parameters are described in detail:

Reverb Level: Reverb quantity to be assigned to the voices generated by the Vocalizer

Delay Level: Delay quantity to be assigned to the voices generated by the Vocalizer

Vibrato Depth: Intensity of the Vibrato effect on the voices generated by the Vocalizer

Vibrato Rate: Vibrato effect speed

Vibrato Delay: Delay value of the starting of the Vibrato effect

Modulation: If activated (On), the Vibrato is controlled by the Modulation wheel

Pitch Bend: If activated (On), Pitch Bend effects can be achieved on the voices generated, acting on the rel-

evant wheel

Limiter: A particular effect allowing you to control the level of the input signal in order not to saturate the

DSP. This should always be left On, especially if the singer has a powerful and dynamic voice.

Singer: Defines the timbre of the voices generated by the Vocalizer, with male and female option.

F7 Filter:

Pressing this function push button displays a number of parameters to control the three vocal formants for the

same number of voices generated, as well as the equalizer with three bands for the direct voice and for the gen-

erated voices. The Vocalizer indeed works on three bands of formants, in order not to completely change the tim-

bre when changing its intonation. The formants theory is a very complex one, and substantially based on the idea

that the human voice is characterised by fixed frequencies for certain intonations, so modifying these you obtain

different timbres. The parameters are selected with the CURSOR +/- buttons and the value is entered with the

VALUE +/- buttons. To go back to the main page of Vocalizer Edit, press once more the F7 Filter function button.

In the following the parameters are described in detail: