Operation Manual

Global: This is used to disable the control of all the parameters related to MIDI, Arrange Mode, Drum Mixer, Utility, Effect, 2nd Voice,
Global Transpose, Split Point, Left Level and Tempo.
F1 Arrange 1/3: This is used to disable the control of the parameters programmed in the Arrange View menu.
F1 Arrange 2/3: This is used to disable the control of the parameters programmed in the Arrange Mode menu in page 1/2.
F1 Arrange 3/3: This is used to disable the control of the parameters programmed in the Arrange Mode menu in page 2/2.
F2 Drum Mixer: This is used to disable the control of the parameters programmed in the Drum Mixer menu.
F3 Utility 1/2: This is used to disable the control of the parameters programmed in the Utility menu in page 1/3
F3 Utility 2/2: This is used to disable the control of the parameters programmed in the Utility menu in pages 2/3 and 3/3
F4 Effects: This is used to disable the control of the parameters Effect menu.
F5 Escape: This returns to the previous page of the Utility menu.
F6 Tabs 1/2: This is used to inhibit the control of the enabling status of the relative push buttons on the control panel.
F6 Tabs 2/2: The same as above.
F7 Save: This is used to save the settings made in Registr. Mode in the Flash RAM. These settings are stored even after the instru-
ment has been turned off and are called up when it is turned on again.
F8 Default: This resets the original control status of all the parameters.
F9 Switch Off: When it is enabled (On) it disables the BLOCK REGISTRAT push button, after a few seconds to allow the user to select a
Style rather than a Registration using the numeric keypad.
F10 Select: Once the parameter has been selected F10 Select is used to modify its enabling status.
SD1 Owner’s Manual
96