Operation Manual

/10
DC 15V 4A Mains power supply socket. Please use only the power supply supplied with the instrument.
Output: 15 V, 4 A.
ON/OFF ON/OFF key. This instrument may take up to 30 seconds to start up. To turn off the instrument,
press the ON/OFF key and wait for the instrument to turn off. This may take up to 10 seconds.
SUSTAIN PEDAL Standard jack to connect a Sustain pedal (optional).
VOLUME PEDAL Standard stereo jack to connect a Volume pedal (optional).
VIDEO DVI Digital video interface for connection to an external video monitor.
USB DEVICE This is used to connect a computer USB device or other devices to manage the SD60 as an external
removable unit.
FOOTSWITCH Standard multi-pin plug for connection of an optional pedal to control a number of internal
functions. Compatible with Ketron FS6/FS13.
MIDI Plugs for MIDI IN1 (GM), MIDI IN 2 (Key),, MIDI OUT and MIDI THRU connection.
MAIN OUT Standard mono jack for the main output to connect to a PA STEREO system: left (Left Mono),
right (Right Mono). We strongly recommend that you use the stereo connection for best
performance of the instrument and relevant EFXs. A Mono connection (namely use of only the Left
or Right output) will give poorer reproduction with respect to quality of the sounds and EFXs of
the instrument.
HEADPHONE (Aux) Standard stereo jack for connection to a headphone. The volume of the headphone is controlled
by the Master section.Aux separate Out Assign.
MICRO IN Standard mono combo plug (Jack/Xlr) for connection of a dynamic microphone.
GAIN MICRO Potentiometer for adjustment of the Micro 1 input signal gain.
MICRO OUT Standard mono jack dedicated exclusively to the Micro 1 output.
INPUT Standard mono jack for connection of auxiliary other instrument such Keyboard, Expander, Guitar
or Dynamic Microphone.
SPEAKER ON/OFF Switch for activating or exclusion of the internal speakers.
On the right of the instrument you will nd 3 USB Hosts for connection
to external USB devices such as Pen drives, HD etc.
CONNECTIONS