Operation Manual

ManualsBrandsKetron ManualsAudioSD8

SD5

FF22 NNoottee

, or of all the notes using

FF11 GGlloobbaall

. The value is entered using the

DDAATTAA CCUURRSSOORR ((LLeefftt aanndd RRiigghhtt))

push

buttons.

FF1100 EExxeeccuuttee::

This executes the modification.

FF55 EEssccaappee::

This is used to cancel the whole procedure unless it has been previously confirmed using

FF1100

EExxeeccuuttee

, and sends to the previous page

FF11 RReecco

orrdd

F10 Clear: This is used to cancel the contents of a track in a different

manner for the Drum tracks and the lead tracks (including

Bass). It is indeed possible to select and cancel the drum

'notes' associated with the Drum tracks. Once the Drum

track to be modified has been selected, press and hold

down the F10 Clear push button. A new window will appear

with the following parameters:

F1 Drum 2: This cancels Drum track 2

FF22 TTeemmppoo::

This is present only for Drum 1 track. If

you select this function any Tempo data recorded

will be cancelled.

FF33 NNoottee::

This is used to cancel a single note. By

holding down F10 Clear of the previous page, play

the note to be cancelled on the keyboard. It will be cancelled immediately without a confirmation dialog.

FF55 GGlloobbaall::

Press this push button to cancel the entire Drum track. With regards to the lead track, it is only pos-

sible to cancel the entire track. Select the track to be cancelled and hold down F10 Clear and a new page will

appear with:

F5 Global: By selecting this function the whole contents of the track are cancelled immediately,

without the display of a confirmation dialog.

NNoottee::

There are two aspects to bear in mind when recording:

●

The variations made to the tempo using

TTEEMMPPOO --

TTEEMMPPOO ++

(during a recording) are recorded and associated with the Drum 1 track.

●

When recording on a track that already bears some musical data, the old notes will not be cancelled. In other as you record onto this track,

the notes played are also recorded (while the old ones remain) by means of an over-dubbing process.

Press the

EEXXIITT

key to return to the initial page of Pattern Edit.

F2 PARAMETER

From the Edit Pattern menu you can select this page where some overall parame-

ters for the whole Pattern can be modified. It is preferable to set these parameters

before recording a track or a

PPaarrtt

. Some of these parameters can only be modified

with a newly created Pattern (no recording has occurred).

F1 Tempo: Its default setting is 120 bpm. This value can be modified

using the

TTEEMMPPOO --

TTEEMMPPOO ++

DDAATTAA CCUURRSSOORR

push buttons.

F2 Time Signature:

This establishes the musical division. The values can be modi-

fied using the

DDAATTAA CCUURRSSOORR

push buttons and by pressing

FF22

TTiimmee SSiiggnnaattuurree

again to change the position in the division.

F3 Autocrash: If enabled (√), a 'Crash' will be played automatically at the

end of every Fill In, Break and Intro.

F4 Crash Level: This establishes the Crash volume related to the Autocrash. It is modified using the

DDAATTAA CCUURRSSOORR

push buttons.

F5 Escape: This is used to return to the main

EEddiitt PPaatttteerrnn

menu.

F8 Bas Octav: This is used to define the octave in which the fundamental note of the bass is found. The value is modified by repeatedly

pressing the

FF88 BBaassss OOccttaavvee

function push button to toggle within various values.

F9 Bass Type: While a bass with four strings cannot go below the note E0, a bass with five strings can go down to note C0. In other words

by choosing a 4-string bass the bass note will not go below E0 and if you change to a 5-string bass the lowest note will

be C0. Pay attention also to the

FF88 BBaassss OOccttaavvee

value, which could cancel the choice of the

BBaassss TTyyppee

. To select a

BBaassss

TTyyppee

press the

FF99 BBaassss TTyyppee

function push button repeatedly.

F10 Save: This is used to save all the parameters modified.

All the lead tracks and respective harmonization and

RReettrriiggggeerr

modes are shown in the middle of the display. To move around within these para-

meters, use the

DDAATTAA CCUURRSSOORR ((UUpp aanndd DDoowwnn))

push buttons and use the

DDAATTAA CCUURRSSOORR ((LLeefftt aanndd RRiigghhtt))

push buttons to modify their status.

The harmonization mode that will also be seen in the Arrange Mode menu is used to choose between two types of harmonization of the notes:

Pattern Edit