Operation Manual

SD5
7
DISK ON This is used to gain access to the management functions both on floppy disk and optional/built in hard disk. When the
DDIISSKK
LED is lit the
PPAAGGEE ++
and
PPAAGGEE --
push buttons can be used to select either the hard disk or the floppy disk.
MICRO (Vacalizer) This is used to access the menu of the Microphone and of the Vocalizer (optional)
TALK This is used to disable the effects on the microphone.
1 TOUCH TO STYLE With this push button will be possible to enable or disable automatic recall of ont touch memories linked to the current style.
SPLIT Split is used to establish which part of the keyboard is assigned to the Arranger and which one to the lead. By default the
split point is set on the note C3, so below this note the keyboard is assigned to the Arranger, whereas above it is assigned
to executing the lead. Proceed as follows to modify the Split:
1. Press the Split button and keep it pressed. At the same time, on the keyboard play the key corresponding to the
desired Split point.
2. Release the Split button. The new value will remain stored until the keyboard is turned off.
LEFT MENU This is used to access the menu dedicated to the arranger functions and to the Split point.
THE DISPLAY, THE MAIN PAGE AND THE FUNCTION PUSH BUTTONS
From the main page of the display, the programming functions can be accessed using the function push buttons at the side of the display
together with the dedicated push buttons. Based on the functions called up, the display shows the related parameters and enables their selec-
tion thanks to the push buttons at the side of the display (or function keys from F1 to F10. They are referred to as function buttons because they
have a different function depending on the page displayed). Therefore simply press the function push button adjacent to a parameter to ena-
ble or select that parameter. When the parameters are situated in the middle of the display then they are selected using the CURSOR push but-
tons.While you will find detailed descriptions of the modification pages further on, below is a description of the single parameters that are
displayed.
Number, name and volume of the style: This indicates the name and number of the style currently in use. Use the
SSTTYYLLEE
push buttons to call
up another one. To modify the volume of the arranger, press the
DDAATTAA CCUURRSSOORR
(
LLeefftt RRiigghhtt
) push buttons, which in this page are used as
BBaallaannccee
.
Sound selected and volume: To change the sound in use on the Right lead section use the
VVOOIICCEESS
push buttons related to the single group or
the
UUSSEERR VVOOIICCEESS
push button. The pair of
RRIIGGHHTT VVOOLLUUMMEE
push buttons are used to modify the volume of the sound.
Second Voices: This indicates a second sound to be layered with the Right lead section. It is entered using the
22NNDD VVOOIICCEE
push button.
Split and transposition point: This indicates the key to the right of which the melodic section is played or Right section dedicated to the right
hand; whereas on the left you will find the part of keyboard used to acknowledge the chords for the Arranger and for the notes to be played in
the Lower section with the left hand. The modification is made with the related key.
Transp. This indicates the number of semitones for transposition that can be changed using the
TTRRAANNSSPPOOSSEE ++
e
TTRRAANNSSPPOOSSEE
push buttons. When
a double dash is displayed transposition is off.
Tempo and beat of the style: This indicates the current Tempo of the Arranger. Use the
TTEEMMPPOO ++
e
TTEEMMPPOO --
push buttons to modify it. The beat
indicator is used to avoid visually losing the beat of the bar being played.
Chord: This indicates the chord currently being played. To change it play another chord on the part of keyboard to the left of the
SSpplliitt
point.
Volume cursors of the main sections of the keyboard: These graphically display, with absolute values, the settings of the volumes of the
Drums, Bass, Chord and Right sections, the value of which can be directly modified using the pair of
VVOOLLUUMMEE
push buttons pairs. To modify the
Control panel and push button functions
Style number and name
Style volume
Split note
Transposition
Selected sound
Sound volume
Second Voice
Played chord
Right hand volume
Style tempo
Left hand volume
Accompaniment sections volumes