Quick Start Guide

/10
CONNECTIONS
DC 15V 4A Mains power supply socket Please use only the power supply supplied with the instrument.
Output: 15V, 4 A.
ON/OFF ON/OFF key. This instrument may take up to 30 seconds to start up. To turn off the instrument,
press the ON/OFF key and wait for the instrument to turn off. This may take up to 10 seconds.
SUSTAIN Standard jack to connect a Sustain pedal (optional).
VOLUME Standard stereo jack to connect a Volume pedal (optional).
DVI Digital video interface for connection to an external video monitor.
USB This is used to connect a computer USB device or other devices to manage the SD80 as an
external removable unit.
FOOTSWITCH Standard multi-pin plug for connection of an optional pedal to control a number of internal
functions. Compatible with Ketron FS6/FS13.
MIDI Plugs for MIDI IN1 (GM), MIDI IN2 (Keyb), MIDI OUT and MIDI THRU connection.
RIGHT (Mono) Standard mono jack for the main output to connect to a PA STEREO system: left (Left Mono), right
/ LEFT (Mono) (Right Mono). We strongly recommend that you use the stereo connection for best performance
of the instrument and relevant EFXs. A Mono connection (namely use of only the Left or Right
output) will give poorer reproduction with respect to quality of the sounds and EFXs of the
instrument.
HEADPHONE (Aux) Standard stereo jack for connection to a headphone. The volume of the headphone is controlled
by the Master section. Headphone connected (or jack for other uses) automatically excludes
internal speakers.
MICRO IN Standard mono combo plug (Jack/XLR) for connection of a dynamic microphone.
GAIN MICRO Potentiometer for adjustment of the Micro 1 input signal gain.
MICRO OUT Standard mono jack dedicated exclusively to the Micro 1 output.
INPUT Standard mono jack for connection of auxiliary other instrument such Keyboard, Expander, Guitar
or Dynamic Microphone
BRIGHTNESS Brightness adjustment.
SPEAKER ON / OFF Switch for activating or exclusion of the internal speakers.
On the right of the instrument you will nd 3 USB Hosts for connection
to external USB devices such as Pen drives, HD etc.