Operation Manual

●

If the LED of the PROGRAM push button is lit, the VOICE push buttons call up the Program voices.

●

If the LED of the ONE TOUCH push button is lit, the first row of STYLE push buttons calls up one of the six pages of the One Touch memory

locations.

PUSH BUTTONS ON THE RIGHT-HAND SIDE OF THE CONTROL PANEL

PROGRAM When the LED is lit, eight Program locations are displayed, to be selected using the function push buttons. A Program com-

bines up to four voices dedicated to the lead section with the related parameters.

JUMP When the LED is lit, it jumps from when arranger to another according to the fill in played. Fill in 1 switch to arranger A, fill

in 2 switch to arranger B, fill in 3 switch to arranger C and fill in 4 switch to arranger D.

USER VOICE When the LED is lit, this allows you to call up the User Voices using the Voice push buttons.

1 TOUCH When the LED is lit, ten sounds within the first of the eight groups available are displayed. The One Touch Solo function is

used to save the most frequently used Voices so that they can be called up easier rather than having to first select the voice

group and then a sound from within it.

STYLES A/B When the LED Is lit, It switch to styles located from 001 to 099 on A and to styles located from 100 to 199 on B. This function

Is useful only In numeric selection mode.

PLAY CONTROL This is used to access a menu for settings relevant to the section to the right of the Split point, used for the lead to pro-

gram effects for the Voices and the microphone as well as the editing of the Second Voice.

DISK This is used to gain access to the management functions both on floppy disk and optional/built in hard disk. When the DISK

LED is lit the PAGE + and PAGE – push buttons can be used to select either the hard disk or the floppy disk.

SONG PLAY This enables the playback of Midi files. It is also used to call up Midi file chains, to display the words and to transpose the

whole Midi file.

DISK+SONG PLAY Pressed down at the same time allow you to record on disk (as a Midi file) whatever is played on the keyboard.

PATTERN When the LED is lit, this allows you to select Styles loaded in RAM from the floppy disk or from the hard disk.

ENDING It plays the three endings of the style as follow: If arranger A Is selected and the ending is pushed it plays ending 1 and the

led will not lit, If arranger B Is selected It will play ending 2 and the led will lit, If arranger C or D are selected It will play

ending 3 and the lit will blink.

THE PUSH BUTTONS REQUIRED TO CONTROL THE ARRANGER

The bottom row of the control panel is almost entirely dedicated to controlling the Arranger in real time. From left to right you will see:

LEFT CONTROL This is used to access the menu dedicated to the arranger functions and to the Split point.

KEY START/SONG REMIX PLAY When the LED is lit and the Arranger is stopped, this push button is used to start the accompaniment when a

note to the left of the split point on the keyboard is played. If an INTRO or a FILL is selected, as soon as a

chord is played, that Intro or Fill-In of the style will start. To control the performance of the Lower section,

namely the manual voices for the left hand, the player must access the ARRANGE MODE menu where these

Lower voices can be disabled when the Arranger is not running. This also allows the user to prevent the Lower

voice(s) from sounding prior to the arranger starting. When in Song Play mode, this push button is used to

select the drum track of the Song being played, for the Remix function.

VEGA

Control panel and push button functions